Dell PowerEdge M1000e Chassis Management Controller Firmware Version 5.1 User’s Guide

Selected Component Information

Information for the selected component is displayed in three independent sections:

Health and Performance and Properties — Displays the active critical and non-critical events as shown by the hardware logs and the performance data that vary with time.
Properties — Displays the component properties that do not vary with time or change only infrequently.
Quick Links — Provides links to navigate to the most frequently accessed pages, and also the most frequently performed actions. Only links applicable to the selected component are displayed in this section.

The following table lists the component properties and information displayed on the Chassis Health page in Web interface.

Component	Heath and Performance Properties	Properties	Quick Links
LCD Assembly	LCD Health Chassis Health	None	None
Active and Standby CMCs	Redundancy Mode MAC Address IPv4 IPv6	Firmware Standby Firmware Last Update Hardware	CMC Status Networking Firmware Update
All Servers and Individual Servers	Power State Power Consumtion Health Power Allocated Temperature	Name Model Service Tag Host Name iDRAC CPLD BIOS OS CPU Information Total System Memory	Server Status Launch Remote Console Launch iDRAC GUI Launch OMSA GUI Power Off Server Remote File Share Deploy iDRAC Network Server Component Update
iKVM	OSCAR Console	Name Part Number Firmware Hardware	iKVM Status Firmware Update
Power Supply Units	Power Status	Capacity	Power Supply Status Power Consumption System Budget
Fans	Speed	Lower Critical Threshold Upper Critical Threshold	Fans Status
IOM Slot	Power State Role	Model Service Tag	IOM Status