Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell PowerEdge M1000e Chassis Management Controller Firmware Version 5.1 User’s Guide

PDF

Viewing Enhanced Chassis Logs Using the Web Interface

To view enhanced logging of the chassis the Enable Enhanced Logging and Events option in the General Settings page must be enabled.
You can view all the chassis activities, filter the logs, clear the logs, or save the logs using the Chassis Log page.

To save a copy of the CMC log to your management station or network, click Save Log and then specify a location save the log file.

  1. To view the Enhanced Chassis log using the CMC Web interface, in the system tree, go to Chassis Overview and click Logs > CMC Log . The Chassis Log page is displayed.
  2. In the Log Filter section, select Log Type or Status Level from the respective drop-down menu, or enter the keyword or date in the Keyword Search and Date range fields and then click Apply. The Chassis Log table displays the logs that are sorted based on the selected filters.
  3. To save a copy of the Chassis Log to your management station or network, click Save Log and then specify a location save the log file. Alternatively, to clear the current entries in the hardware log click Clear Log.
For more information about the other fields and using the Web Interface, see the CMC Online Help.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\