Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

--formfactor

Option	`––formfactor`
Valid Arguments	read-only
Description	Displays the geometry of PowerEdge Blade systems. The option can have the following values: halfheight (the Blade systems occupies 1 slot of the chassis), halfheight, dualwide (the Blade system occupies 2 horizontal slots of the chassis), fullheight (the Blade system occupies 2 vertical slots of the chassis), fullheight, dualwide (the Blade system occupies 4 slots of the chassis). NOTE: On 12G systems, the option will have an additional value, quarterheight (the Blade systems occupies half slot of the chassis). Example: A:>syscfg --formfactor=fullheight, dualwide formfactor=fullheight, dualwide
Applicable Systems	All PowerEdge blade systems including 12G systems.