Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

PDF

Enumerating Virtual Disks

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for enumerating virtual disks.

Table 1. Enumerating Virtual Disks
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
`—vd or vdisk`	NA	NA	Lists all the virtual disks for each controller along with the array disks that make up each virtual disk. This option is mandatory. Example: A:>raidcfg -vd Controller: PERC 6/E Virtual disk not found Controller: PERC 6/E VDisk ID: 0 Size: 34680 MB Type: RAID 1 Read Policy: Normal Read Ahead Write Policy: Writeback Cache Policy: Direct_IO Drives: 0:0:0,0:1:0 Controller: PERC 6/E Virtual disk not found Controller: PERC 6/E Virtual disk not found RAIDCFG Command successful!
`-vd or vdisk`	`-c or controller id`	`< valid controller ID number>`	Lists all the virtual disks under the indicated controllers. Each virtual disk is displayed with the physical disk that comprises it. The `-c` option is optional and can be added to the command line in any order after the mandatory option. Example: A:>raidcfg -vd -c=2 Controller: PERC 6/E VDisk ID: 0 Size: 34680 MB Type: RAID 1 Read Policy: Normal Read Ahead Write Policy: Writeback Cache Policy: Direct_IO Drives: 0:0:0,0:1:0 RAIDCFG Command successful!
`-vd -c=id` or `vdisk controllerid= id`	`-vd or vdisk`	<valid virtual disk ID number>	Displays details about a single virtual disk under the indicated controller. The -vd -c= id option combination is mandatory. The second -vd option is optional and can be added to the command line in any order after the mandatory option combination. Example: A:>raidcfg -vd -c=2 -vd=0 Controller: PERC 6/E VDisk ID: 0 Size: 34680 MB Type: RAID 1 Read Policy: Normal Read Ahead Write Policy: Writeback Cache Policy: Direct_IO Drives: 0:0:0,0:1:0 Dedicated HS: 1:2:0 RAIDCFG Command successful!