Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Assigning, Unassigning, And Listing Global Hot Spares

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for assigning and unassigning global hot spares.

Table 1. Assigning, Unassigning, and Listing Global Hot Spares
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
`-ctrl -ac=sghs -c=id -ad\|-pd= ch:targ:encl` or `controller action=setglobalhotspare controllerid=id adisk\|pdisk=channel:target:enclosure`	NA	NA	Assigns the specified disk as a global hot spare on the controller. You can assign only one disk at a time. Example: A:>raidcfg -ctrl -ac=sghs -c=2 -ad=0:1 RAIDCFG Command successful!
`-ad\|-pd -ac=lghs -c=id` or `adisk\|pdisk -action=listglobalhotspare controllerid=id`	NA	NA	Displays the array (physical) disks used for global hot spare for the specified controller. Example: A:>raidcfg -ad -ac=lghs -c=2 RAIDCFG Command successful!
`-ctrl —ac=rghs -c=id -ad\|-pd= ch:targ:encl` or `controller action=removeglobalhotspare controllerid=id adisk\|pdisk=channel:target:enclosure`	NA	NA	Unassigns all the specified global hot spares to a disk on the specified controller. Example: A:>raidcfg -ctrl -ac=rghs -c=2-ad=0:1,0:2 RAIDCFG Command successful!