Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

Installing a power supply unit

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: When installing, hot-swapping, or hot-adding a new power supply unit (PSU), allow several seconds for the system to recognize the PSU and determine its status. The PSU status indicator turns green to indicate that the PSU is functioning properly.

Ensure that you read the Safety instructions.
Remove the PSU.
NOTE: You must remove a power supply to replace a faulty power supply, service other components of the system, or to reduce chassis weight when installing the enclosure in the rack.

Steps

Slide the PSU into the enclosure until the PSU is fully seated and the release latch snaps into place.
CAUTION: When connecting the power cable, secure the cable with the strap.
Connect the power cable to the PSU and plug the cable into a power outlet.

Vitajte

Vitajte v spoločnosti Dell!

Dell PowerEdge FX2 and FX2s Enclosure Owner's Manual

Installing a power supply unit

Prerequisites

Steps

Ohodnotiť tento obsah