Unsolved
This post is more than 5 years old
16 Posts
0
147988
Best way to OC the 630i
Hey,
I'm recently trying to OC my 630 to around 3ghz. I have red about it, and it should be easy doable with stock volt and cooler.
But as i tried, i coudn't do it the old way.. trough the bios. Simply because i can't find anything there that alows me to adjust the FSB... I can change the volt, the mem, etc.. but not the FSB
So i tried the Nvidia tool.. but that is really anoying. I reached 2.7ghz with no prb, but as soon as i hitted 2.8, it still loaded to windows.. but then the whole screen just froze and you coudn't do anything. The only way to undo it, was to go to save mode and delete the profile you made in the Nvidia tool.
Have any of you have experience with Oc'ing your 630 and what result did you get? And especially, how did you managed to get it?
Kind regards,
Mr. Scary
597 Posts
0
May 2nd, 2008 06:00
Here's 3.6! M$ stable:) man as long as you don't go over the 1333 fsb, you're ok??? that's bludeeee WHACK! so far.
movin' the fsb from 1200, SLOWLY, up. we'll see.
veweee, vewee, confoosing, don't u tink?
skimmy1
347 Posts
0
May 2nd, 2008 07:00
Mr. Scary
597 Posts
0
May 2nd, 2008 07:00
Here's 3.70! we may be onto somethin' with the douse the fsb theory! hard to explain, but.......
ps-yea i know that 5mins ain't a stable oc with p95, BUT, at this point i'm happy it's postin' to windows! i'll run it tonight when i hit a wall. i'm gonna jack the fsb to 1266. be right back:)
ummmmmmm,,,,
WEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!
Mr. Scary
597 Posts
0
May 2nd, 2008 07:00
i don't have a pic of one, but, whaaaa, whaaa, whaaaa, NO i'm j/k, dude~! i hear ya.
yer up right now, give me yer take real quick.
if i'm bsod'n, should i keep up'n the v of the cpu, or up the chipset a bit?
i'm tryin' to get thru post at 3.8, and i'm close:) got 3.7 thru.
skimmy1
347 Posts
0
May 2nd, 2008 07:00
Yeah that was a preemptive strike. But I'm sure someone will post it now. LOL
Can't sleep Im sick. And since I'm the boss. I can play hooky.
try raising the core to 1.45 and chipset to 1.35v
Mr. Scary
597 Posts
0
May 2nd, 2008 08:00
here's 3.7!!!!!(3.697.2) runnin' p95 now, all night.
skimmy might have made the call to get to 3.7 air cooled! snap shot of the speed, snap of p95 tomorrow morning.....:)
Night all!
Mr. (can't believe this fsb bunk!!!) $cary
Mr. Scary
597 Posts
0
May 2nd, 2008 08:00
oooooooooooo, u may be close, stand by!
Mr. Scary
597 Posts
0
May 2nd, 2008 08:00
yep, that 's good readin' but let's see home boy oc without usin' the fsb! that's man style! actually i think something is broke or whatever. i've proved that i can't get x001 over the fact 1333mhz and i'm at the same 3.7ghz. man if i could find the fsb answer, i know i could do 4g's with the liquid!
i just can't find it:(
goin' offline, frustrated!
actualy p95 is runnin' and gonna run all night tonight to test 3.697, sooooooooooooooooooooo
here's 30mins
kneenerkneenerkneener!
late
Mr. Scary
597 Posts
0
May 2nd, 2008 08:00
NOPE! 30 MINS, to hot, peaked past 70*!
now it's time for the liquid!
xps420OC
244 Posts
0
May 2nd, 2008 15:00
MS,
If you cant get even 1mhz over 1333 its not a voltage of simple issue like that.
It has to be hardware related.
I would bet its the mobo.
Since you cant up your FSB, have tou tried 1333mhz x 11 = 3.7Ghz and to get to 4.0ghz rase the multi to 12. You should be able to keep you voltages low with this. at 3.7 try 1.4v CPU and 1.35vFSB. If that doesnt work up to 1.5vCPU and 1.4VFSB. If that works bring CPU volts down .01v(or what ever the smallest you can move is).
Ruski07
121 Posts
0
May 2nd, 2008 16:00
Mr. Scary
597 Posts
0
May 2nd, 2008 16:00
thanx ruski, all tests are run with cpu nvid fan adjust at 100%, exhaust fan at 100% and push fan attached to hs at 100%.
temps under normal use at the oc are 42* idle and flashes up to upper40's and some times low 50's when cpu steps up to the 3.69.
Ruski07
121 Posts
0
May 2nd, 2008 16:00
Rambler358
526 Posts
0
May 2nd, 2008 16:00
Rambler358
526 Posts
0
May 2nd, 2008 16:00