This post is more than 5 years old
2 Posts
0
21988
June 3rd, 2015 06:00
Testing Replication Partner - Login failed
I am trying to setup replication from a 6100 (Primary,running v7.1.2) to a 6500 (Secondary, running v6.0.5). After I configure the replication partner settings on both sides, and run a test from the Primary group, I get the following:
2475510:553:ESXSAN01:MgmtExec: 3-Jun-2015 08:12:57.620553:replTunnel.cc:1633:ERROR:7.4.80:Partner Bunsold-EQL-Grp: iSCSI: login failed. Make sure replication partnership is configured on the remote partner.
The Primary is configured with a management network; but the Secondary is not. The primary can ping the iscsi interfaces on the secondary from its iscsi interfaces.
I am wondering if the different firmware versions are causing issues. I was hoping to not have to update the Secondary (as it has other group with multiple devices already replicating to it).
Any ideas?
arronking
2 Posts
0
June 3rd, 2015 06:00
Nevermind. It appears that I had a typo in the Group Name when I configured the partner settings. I didn't realize it would use the Group name as well as the IP. Makes sense now that I think about it. SMH