Search Results (7K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
I repeatedly getting these critical system errors after a gpu kit installation. Fans are spinning and working but this errors is quite annoying. Is it normal or I'm using some kind of wrong model fans? Thanks a lot for your help and time.
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all, I recently acquired a Dell PowerEdge R640 and noticed that its BIOS looks like the following: I have other R640's which have the more modern BIOS interface (which also doesnt run / feel incredibly sluggish either) Anyone got any hints / suggestions to fixing this? Thanks
Question
•
Rack Servers
Community Accepted Solution
Hi I have four identical R7525 server. Few days ago I updated the iDRAC FW to version 7.00.60.00. (Before it was 6.10.30.00) Direct after the FW update I recived on all four server the same errors:- The System Configuration Check operation resulted in multiple Riser issues. - The System Configurati
Question
•
Rack Servers
Community Accepted Solution
Hi, I'm able to add the majority of our fleet of VRTX with M630/M640 modules from Discovery with local admin sign in. About 20 percent of our fleet fails to add via discovery. I ran the built in troubleshoot tool and it's successful in connecting with every protocol option. Is there somewhere I ca
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, The manual for the R740xd references a "3.5 inch (x12) Hybrid backplane with NVMe U.2 SSD". Does anyone know if I'd be able to upgrade my "3.5 inch (x12) SAS/SATA backplane" with this hybrid backplane? If so, what part numbers would I need. I cannot find much information a
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
What is the part number for the CRTL_SRC_SB1 Cable for a Dell R550 16x2.5 SFF?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Hi all, We have installed two new blades M640 on a VRTX chassis that have another 2 existing blades. I check we have the two SPERCs correctly detected but the new blades are not able to see shared storage. Checking inventory on each blade I find that existing blades have these entries "Chassis I
Question
•
Blades
Community Accepted Solution
Hello, I have an M630 Blade with a HWC2014 Code and the error message is "A hardware misconfiguration detected on BP1 Cfg." I am not sure what this means or where to look. I checked out this link: Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2 | Dell
Question
•
Rack Servers
Community Accepted Solution
Hello, I have add 3 sas hard drive in raid 5 to expand my current storage which was 20TB and now add 12TB in Dell power edge R740. But since 24 hrs it show reconstruction progress is 0%. Can you please help me with it, how much more time it takes to rebuild.
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
I have a Dell 1000E blade with a 220v power supply, I want to exchange the 220v sources for 220v/110v sources, both have the same specification, what changes is the input voltage which will change to 220v/127v. Is it possible and compatible?
Question
•
Blades
Community Accepted Solution
Dear all, I have strange issues with R740XD server, HWC2003 Storeage BP1 SAS A cable or interconnect failure. Check connection, i dint have midbay and backplane, my controller is on MiniMono Perc cable and I see my SSD´s , can i remove this error somehow ? and why this happening ? thanks all fro
Question
•
Rack Servers
Community Accepted Solution
I bought a PERC H750 raid controller to replace the PERC H330 that came with my PowerEdge T440. The T440 has 8 3.5" drive bays now fitted with 8 18TB SAS drives. A couple of basic questions I'm hoping someone could help me with: The cable with the H330 obviously won't fit the H750. What cable do
Question
•
PowerEdge HDD/SCSI/RAID
Community Accepted Solution
Hello, I'm using OpenManage Enterprise 4.0.0 (Build 202) with Update Manager 1.5.0.429. I successfully created a new repository in Plugins/Update Management, and it also created an associate baseline. But when editing any baseline in Configuration/Firmware Driver Compliance, I can only select catal
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I am using OME 4.0 to update some PowerEdge C6420. Currently they have iDRAC with Lifecycle Controller 4.x, and I'm updating against a baseline based on an automatically updated catalog (daily). Some have been updated the past days to 7.x, now the baseline reports 6.x as latest and suggests to downg
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Congratulations. There is a need to upgrade a 2U Dell PowerEdge R540 serverA second processor must be installed. Please help in finding the appropriate spare parts, namely: radiatorbracket to the processorfan Also, please tell me the SKU of spare parts. Currently, we have the following from open s
Question
•
PowerEdge Hardware General
Community Accepted Solution
Dear all, I just discovered the existence of OpenManage Enterprise 4.0.Reading the migration process from 3.10 I found out that in the OME 3.10 interface I should find a "Backup/Restore" menu item, but I can't find it in my OME 3.10 installation: Why I don't have the backup/restore menu item? Shou
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Dear Team, We have an R750 server with riser config: Config2-1. with 4x FH and 2x LP We also have a converged GPU + DPU - A30X. It consists of combined Bluefield 2 and A30 GPU with claimed 230W power requirement: https://www.nvidia.com/content/dam/en-zz/Solutions/gtcf21/converged-accelerator/pdf/da
Question
•
PowerEdge Hardware General
Community Accepted Solution
I have minimised the system and the ds3 and ds4 lights on the motherboard are always on. idrac light is flashing orange. I've tried replacing the memory in 1R and 2R to no avail. any help?
Question
•
PowerEdge Hardware General
Community Accepted Solution
Good Morning, I have a legacy R430 that is well out of support and is in need of both BIOS and iDRAC updates. The current firmware versions are as follows: FIRMWARE CURRENT PLANNED iDRAC 2.70.70.70 2.85.85.85 BIOS 2.11.0 2.18.2
Question
•
Rack Servers
Community Accepted Solution
Hi everyone! Can anybody explain what mean this message?
Question
•
PowerEdge Hardware General