Search Results (6.3K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Dear Dell support, I have downloaded UnityVSA-5.3.0.0.5.120.OVA and downloaded XML file later we have converted into .lic file still getting this popup. Please help me! Thank for all
Question
•
Unity
Community Accepted Solution
Hello, How add new sc420 to storage sc5020(without any enclosure). I dont see information on documents, We must shutdwon storage And Connect sc420 to storage or Connect sc420 to storage And power on sc420 ?
Question
•
Compellent
Community Accepted Solution
After decommisioning of an unused CX3 storage we are reconfiguring an old CX4-120 for backup replication purpose. CX4 had initially: - enclosure 0 with 15 disks (450GB FC STE45085 CLAR450 disks) - enclosure 1 with 15 disks (1TB SATA II WD1002FBCLAR1000 disks) We are trying to switch to: - enclosu
Question
•
VNX
Community Accepted Solution
Hello good evening, after following all the recommendations made and analyzing the manual, unfortunately we were unable to do so, thank you for your support.
Question
•
PowerVault
Community Accepted Solution
Hello, It seems https://www.dell.com/en-us/dt/software-downloads/forms/unityvsa.htm is broken, and upon completing the form you get "Invalid Access" when trying to get "7RGCR_Dell-UnityVSA-5.3.0.0.5.120-OVA-image.ova". Secondly it seems like Community Edition is no longer easy to find as EMC links
Question
•
Unity
Community Accepted Solution
HI I have this new storage and soon we would put it in production but I would have a question here I will go with iSCSi connections but I would likie to know on this diagram are these ports dedicated for example on Powerstore T we have one IO module on each node so basically I would connect port 2
Question
•
PowerStore
Community Accepted Solution
Hi, I have a Powervault TL4000 with an LTO-6 drive and now I could get an LTO-7 drive cheap, I know the part number for the DELL LTO-7 Drive for TL4000 is 0M3HCC, the drive I can get is an IBM 38L7604 in a library sled, there is no other number on the sled. Is it possible to get this
Question
•
PowerVault
Community Accepted Solution
HI Here we have dell powerstore 1200 and I am just wondering about this. This is base IO module and its speed is 10 GBps which based on this article is as it should be https://infohub.delltechnologies.com/l/dell-powerstore-introduction-to-the-platform-1/i-o-module-44/ However in the same article if
Question
•
PowerStore
Community Accepted Solution
Bonjour,We just migrated our virtual environments to vsphere 8.0.2 and unfortunately the vsphere plugin (6.1.1) no longer works Is there a dsitv update planned to fully support Vcenter 8+Cordialement Michel
Question
•
Compellent
Community Accepted Solution
Closed
I have been unable to access midrangesizer.dell.com for a while now. I'm trying to self service Unity configurations. This Aug 2023 post directs me to midrangesizer.dell.com. I get this error message: . Is this still the tool/URL for Unity? Is it down for all, or just me?
Question
•
Unity
Community Accepted Solution
Good day!We have Unity 350F (All Flash 15.36TB SSD 2.5in) storage with part number 005-052-558. Is 005-052-129 compatible with that one?From the image, what does DC NEBS stand for? Thank you!
Question
•
Unity
Community Accepted Solution
Hi, I noticed some info about T10 PI of dell product, and then some question. 1) DELL NL-SAS disk is formatted as T10 PI type 2. this is very nice. thanks. 2) 'perc add vd' have a 'pi' option, but this feature is not enabled(perc show pi). here 'pi' just means T10 PI
Question
•
PowerVault
Community Accepted Solution
Hello I have read the discussion about 3820F try to reseat controller and cache and it's still not working The main difference is that we have a full 3860F as replacement parts controller are all at same latest firmware version I would like to know how to change the controller is there any special
Question
•
PowerVault
Community Accepted Solution
Hi, h965e failed to import a vd created by h840. ERROR message: 0x80 The foreign configuration cannot be imported because the configuration is not complete. Ctrl Product Name SASAddress Personality Status PD(s) VD(s) VNOpt EPack--------------------
Question
•
PowerVault
Community Accepted Solution
Hi, For the Unity family is there a way to change the file system's storage pool to another storage pool? I am looking to avoid migrations and /or recreating the file system. I don't see an option to do this from Unisphere. Also, Is it possible to change a NAS Server's storage pool? I had initially
Question
•
Unity
Community Accepted Solution
‘perccli2 /c0 show all' failed to report the disks connected to a H965e/6Gb EMC ESES Enclosure But the disk number(3) is reported in 'perccli2 show' -----------------------------------------------------------------------------------------Ctrl Product Name SASAddress &n
Question
•
PowerVault
Community Accepted Solution
Hi all, I'm trying to figure out what is the largest drive I can put in my EqualLogic PS6100 server. (24 Bay) I understand that's an older machine and has to have EQL drives.. but does anyone know what the largest size per drive I can install? Truly appreciate the help : )
Question
•
EqualLogic
Community Accepted Solution
Hi team, I am trying to get a license for the Community Edition at: https://www.dellemc.com/en-us/auth/elmeval.htm After providing a valid UUID I keep getting the following popup: Requested page is currently not available. Please try after some time. Please do not redirect me to the phone support
Question
•
Unity
Community Accepted Solution
Hi, Populated our SC5020 with a bunch of drives, all Dell SSD 1.92TB drives. I know they are drives made by Samsung.Product ID is MZILS1T9HEJH0D4. Got a few that are unmanaged and after some digging, those have a different firmware version which is CQL5.I am trying to figure out how to update the f
Question
•
Compellent
Community Accepted Solution
I would like to know where I can see active iSCSI connections to a particular volume on the PowerStore GUI. This does not seem possible. Is there a log or something I can view?
Question
•
PowerStore