Search Results (1.4K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hi We are facing issues with uploading a "Rsyslog Server CA" certificate via redfish.Error message is "Unable to complete the current operation. The currently installed license does not support the following features: Telemetry."MessageId: IDRAC.2.9.LIC503But this has nothing to do with the Telemetr
Question
•
Systems Management General
Community Accepted Solution
I try to attach an Ubuntu ISO on the virtual CD and a cloud-init configuration IMG on the Virtual USB. It works when using the virtual console (through the iDRAC web UI) but it doesn't when I call the redfish API. The 1st I insert gets inserted, the 2nd one always gets refused (virtual media already
Question
•
Systems Management General
Community Accepted Solution
Hello,We have a Poweredge R640 that I'm looking to upgrade to the latest iDRAC, from 4.20.20.20 to 7.00.00.171and the BIOS from 2.8.2 to 2.21.2Can I upgrade straight to the latest version or should I do a stepped upgrade?
Question
•
Systems Management General
Community Accepted Solution
Hi, Our organisation is currently looking into using Entra ID for a number of apps. Does anyone know whether OME supports authentication using Entra ID? If so has anyone successfully implemented it? I just wanted to see if this is possible before disappearing down an authentication rabbit h
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi everyone, I have the server dell r740 and already install dell EMC open manage. so, i have plan to remove or uninstall this feature. what's the impact if i do to un-install dell EMC open manage ?
Question
•
Dell OpenManage Essentials
Community Accepted Solution
i have a T420 server box with sandy bridge motherboard. Yet every where I look, the specs say this board will support the E5-2400 v2 IVY bridge cpus, even gemini and chatgpt say this. Can i have a definitive answer about this because I have two of these boxes and four e5-2470 v2 CPUs. Will this ser
Question
•
Systems Management General
Community Accepted Solution
Hello, I have created catalog, then created baseline with one R430 server, then I did check compliance, and report shows me that many drivers needs to be updated but I cannot check any item on this report when I point mouse on check box it shows me "Device does not support Firmware Update" When I
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi Team, We have been noticing error on Dell OME console and plugins. it states as below. " This plugin does not meet the minimum requirements for installation" Appliance resources are not sufficient to either install or continue to run the Update Manager plugin efficiently:The OME VM is not confi
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
LIC017 MessageThe license file is corrupted, has not been unzipped, or is not a valid license file.Detailed DescriptionThis error can occur when the license file: 1) Signature is not valid. 2) Data is not in the correct format. 3) Missing needed data. 4) Contains unknown data. 5) Has not been unzipp
Question
•
Systems Management General
Community Accepted Solution
Customer using HCI based on VMware VSAN Ready nodes running on Dell PowerEdge servers. So, I'm wondering does CloudIQ support to collect those data? any concerns or limitation? Thank you. Panat
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, I want to migrate to OME v4 from a 3.10.2 version I managed to complete the first steps of the process on the v3 appliance but on the v4 appliance (destination) step 3 is stucked : Step 3: Check For Migration Readiness (import) Impossible to go further... Is there a solution to unblock t
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi i'm running firmware upgrade on more hosts inside Openmanage 4 and others on openmanage 3. I'm able to perform the upgrade, but after the host is updated it remain in power off. At the beginning the server is power on, operating system is ESXi 7.0.3. I've the same issue both on version 4 and 3 of
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi all, I am writing a script to automate BIOS changes and I am stuck on the part where I have to decide whether to Apply and Reboot or At Next Reboot. I am using Python and iDrac Redfish API. I want to go with At Next Reboot however I am stuck on it. I used: boot_set
Question
•
Systems Management General
Community Accepted Solution
On a fresh OME 4 deployment from the 4.0.0.202 OVF in vSphere 7, I cannot perform the initial admin password change, no matter what I use. If I don't include a special or capital character or not long enough, then it can tell and warns me so typing in appears to be accurate. Have tried powering fu
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello all, I downloaded the latest Hyper-V OME 4.0 vhd file and after creating the VM, assigning 16GB RAM and 4 processors, I just get a blinking cursor on a black screen when trying to boot it up, no errors. I have tried installing it on several servers (Server 2019 and Server 2022 hosts) and get
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Since installing the Dell ISM on Rocky 9.2 all of the hosts are showing ipv6 network errors. These machines are not running ipv6 or IPTABLES (Firewalld is being used). This appears to have crashed 2 of our 17 machines last night. This docuemnt show some info on iDrac communication (page 11) https:
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello We have installed the OMEVV plugin in our vCenter and it works fine as long an vcenter admin is using it. A nonadmin vcenter user cant start it. He receives the error 10008 "vCenter user does not have required privileges to access this feature."Which privileges are needed? The user has all DEL
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi, I'm able to add the majority of our fleet of VRTX with M630/M640 modules from Discovery with local admin sign in. About 20 percent of our fleet fails to add via discovery. I ran the built in troubleshoot tool and it's successful in connecting with every protocol option. Is there somewhere I ca
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hello, I'm using OpenManage Enterprise 4.0.0 (Build 202) with Update Manager 1.5.0.429. I successfully created a new repository in Plugins/Update Management, and it also created an associate baseline. But when editing any baseline in Configuration/Firmware Driver Compliance, I can only select catal
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I am using OME 4.0 to update some PowerEdge C6420. Currently they have iDRAC with Lifecycle Controller 4.x, and I'm updating against a baseline based on an automatically updated catalog (daily). Some have been updated the past days to 7.x, now the baseline reports 6.x as latest and suggests to downg
Question
•
Dell OpenManage Enterprise