Search

Hi all, I am trying to update a R620 with OME but inventory process fails. "Inventory detals were not provided by device". OME version is 3.9.0 Server iDRAC version is 1.57.57 Regards,

Hello, i see several problems after upgrade to 3.9.2.9 to 3.10.0.169. BuildIn Admin user now has the role "Backup Administrator", but role "Backup Administrator" did not exist for new users. Prior to the upgrade i renamed the "Default Inventory Task", after the upgrade i now have a new "Default I

Hi All, Hoping to get some help on this one.  DNS settings are correct and authentication and directory services have been configured, but for some reason i cant resolve any DNS names from the appliance.  Version 3.9.0 (Build 55) Regards

I have an OME 3.6.1 VM (Hyper-V), which I'm trying to bring up to current version. Entire system is firewalled, and has no internet access, so this has to be an Offline update.  I realize this will need to be several hops, so I've downloaded every version between 3.6.2 and 3.10.0 from htt

Same question posted in another section (modified by moderator)

I saw the 3.10.0 release came out yesterday.https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=fmk91&dcp=emailWe have 2 instances running 3.9.0 and neither of them are seeing the updates (3.9.1, 3.9.2, 3.10.0) are available with the Online option as described hereI looked at

System Model: PowerEdge R720Operating System: Windows Server 2012 R2BIOS Version: 1.6.0iDRAC7 Firmware Version: 1.66.65 (Build 07)Lifecycle Controller Firmware: 1.1.5.165 Start of following events: 2023-01-22 17:34 Used Lifecycle to execute Dell Update Package BIOS_8P8WX_WN32_2.9.0.EXE and receive

Hi,I am trying to re-configure the IDRAC from racadm (can't reach from network). I am getting this: racadm getniccfg IPv4 settings: NIC Enabled = 1 IPv4 Enabled = 1 DHCP Enabled = 1 IP Address = 10.0.100.202 Subnet Mask = 255.255.255.0 Gateway

Hello Community , i am new to RDM so my question might be straight forward. i installed the newest version of DRM :3.4.3 and i have created a customized catalog for our servers.. i have exported the catalog to a local disk and enabled the destination folder to be an SMB share , however when i go

Hello, Since a few weeks now (can't really find out when), for my x30s, there is a very old firmware "downgrade" proposed by Dell OME : I found a newer one available since December 2022 but it doesn't show up and anyway, such a downgrade is my opinion not OK : https://www.dell.com/support/

Hi Team .. Service Tag could not be verified while updating firmware. we have done the 2 proccess below: 1- enabled V1 in the Appliance share setting 2- updated BIOS & Idrac manually we still facing same issue. Br/ Khiyar Issa

Hi, I have a couple of iDRAC7 that now fail to search for firmware upgrades from downloads.dell.com.When looking at Job Queue.The error message is RED060: The specified repository catalog is not supported.  Has the Catalog.xml changed format?

Hi, today I've noticed that for all of my yx2x systems firmware is not available. There is an info that update file not in catalog. According to support matrix that hardware should be supported. Last week everything was fine and I was able to update yx2x systems. Do you know what is going on?

OpenManage Enterprise says I need to upgrade my iSM LC DUP to version 5.0.1.0 for my PowerEdge R650, but the support website doesn't have any links to version 5.0.1, where can I download it? If I put in my service tag, the latest version available on the support website is version 4.3.0.0. The li

The PC does not Post and has error code 1,4 and amber light and pressing the power button shows code 3. It is a Core 4 with 4 GB RAM.

Hello, I have a Poweredge R730 and the CPU temp is always at 62-64 degrees Celsius, this is about 15 degrees hotter than the same server types in the same comms room and rack. Does this seem abnormally high? Interestingly the fans are running about 500 rpm lower than the other models. I have ch

Hello, I´m trying to deploy a Profile for Dell Poweredge R740 Server. I´ve discovered the template automatically from a reference server and then putted into a new profile. The Profile is available but when I try to deploy it, there is no target device available for selection. I can see only empty

Just installed OpenManage Administrator Node 10.3 and got the error "Windows can't verify the publisher of this driver software". Why does Dell have software with unsigned drivers!? This threatens the stability of my servers. Did Dell's OpenManage software get infected or is Dell just lazy??

Hello , When i try to register the register the Service Plugin from OpenManage Enterprise first i see an Window where i have to fill out an Access key and an PIN . But i dont have this Informations .  Therefore i choose "Generate Access key and PIN" , then i was redirected on an Website .&nb

OME 3.9 (Build 55),  Discovery for IDRAC with WSMAN.   All old servers (R620) were discovered with no problem.  all new servers (R650, R640, R630) failed.   Unable to perform the requested action because the device management endpoint authentication over WSMAN, REDFI