Search

I have a PS 6100 with two Type 11 controllers. One of the controllers went to not being present.  I obtained a new controller and installed that with the SD card from the previous controller.  The new controller also showed as not present.  I out the old controller back in, using the

I have a EQ PS 6100 with 1 bad controller. It is powered on and connected to a switch. It has no ISCSI connections - we are utilizing another SAN product. I need to access the SAN and view the data on the drives and recover files. I can connect via a serial cable directly to the good controller card

I have a three node Windows 2016 cluster that I would like to update to 2019. The compatibility matrix says I'll need HIT 5.4 to work with 2019, and that I would need to upgrade the firmware to at least 9.1.x (PS6100) to support HIT 5.4.  However...the release notes for HIT 5.4 say it works wi

The batteries on both controllers in my PS4210 have failed. I will order replacements, but in the meantime are there any early-boot serial terminal commands or environment variables (the ctrl-P interface) I can use to boot regardless? Some sort of bypass for the controller's battery health checks? M

Hello Community, ich believe to have scanned all the solutions posted so far related to this topic, but it looks like my case is different.We have a PS EQL 6110X (FW V10.0.3) we still depend on in an unforseen demand situation. Recently one of the drives was signalled "tripped".We managed to shore

Hi there, I have an EqualLogic PS6100E storage machine which had battery failure alert on one of it module but while we where awaiting to replace the controller module battery another module battery also failed hence the worse happened power failure, Since then the network ports for both modules di

I had to replace a disk today on a PS6210, so I've uploaded the latest firmware kit and logged in through Putty but I can't run commands. There's a hash mark instead of > . I had no problem with the same operation last July and have been on the 10.0.3 firmware since before that, so I must be comp

Hi there, since its very annoying to manage the ps4210 via java I wanted to ask if there is a way to mange the PC4210 via HTML5 or anything else except java (since we also wanna get rid of java in the company).  

We just received a repurposed Equal Logic PS 6110. After performing a reset to restore it to the default setting, it is unable to initialize or complete a setup.  I am connected via the serial port.  After the reboot, the following message appears:  It appears that the storage array

Hello, I am currently setting up a few servers with ESX 7.0U2 and a PS6100. I couldn't find any information regarding MEM support version 7.x. Are there any particular recommendations for this configuration. Does changing the settings of "Delayed Ack", "LoginTimeout" are still relevant. Does Round

We have an older PS-6100SX that is connected to 3 vmware hosts. We need to replace these hosts. I am trying to copy settings from the old host to the new hosts. I am running into issues with the new hosts connecting to the PS6100. The error I see in the log is "Target returned login error of 020

We have a few M4110 EqualLogic storage systems in the M1000e dell enclosure. one of them is only operating on 1 controller (another slot is not working.) if the working card fails, we will have no cards in the system. if we get a replacement card and swap the SD card, what would need to be done so t

Hey Guys,I have a Dell EqualLogic array of two PS6210 that I'm having an issue with on of the volumes.I have a 2TB volume being used by VMWare VCenter and I started getting an error saying that the volume's used space is more than 98%. Of course in VCenter the volume is not used to that extent and i

Hello. Its possible to upgrade Dell PS6000 with Type 10 Controllers? If i do that it will be full analogue of PS6010? Thanks in advance for the answers

We have a PS6100 with Primary and Secondary controller cards. The Management port on the Primary controller went down (the 4 iSCSI ports remain functional). It failed over to the Secondary Management port. One of my employees used Dell SAN Headquarters to poke around to see what was happening with t

upgrading our EQL 6100 San to 9.09, and the Storage Update Manager lists compatible Host Intergration Tools for Microsoft, where do I find what current version I have?

we have couple of PS6100 EQLs we are going to start setting up for use to backup VMS to, as they are no longer used in production. was upgrading firmware from GUI, and got the message "information: pending reboot for firmware upgrade on member" shouldnt it have rebooted automatically and is this a

we recently moved our virtual infrastructure to the new Powerstore SANs, and since our PS6100 is no longer in production, was looking at using it to backup the VMs nightly using Veeam backup. what would be the best way to accomplish this, are there any "how tos" I can get my hands on to assist wit

I need to change the Default Gateway of two Members in a Group configuration. The current configuration has 3 Members in the same storage pool. The network setup for each Member uses the same subnet and two different DG addresses [2 Members use a DG address that differs from the 3rd Member]. The ini

Hello all, Hoping someone can help. I have recently replaced the battery on the secondary controller on our PS4210. Now, the warning light is showing on the primary. I can log into the EqualLogic Group Manager but I just can't see how to fail the primary controller over the secondary controller? A