Search Results (1.4K)
Conversation Type :
Posts
Published Date :
Lifetime
Category
Community Accepted Solution
Hello team !Due to our facility security policy, i have to create a secondary appliance of my OME entreprise running on VmW7.03As i created lot of custom group / baseline / script / mailing list alerts... i can't manage those future two instance separately.At first, I thinked to create a VIP and wri
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I have read that it is not recommended to update to the most recent for BIOS and firmware and to update progressively. Does anyone have a recommended update path from my current state: CPUs: 2x Xeon E5-2430 v2BIOS: 2.1.2 Firmware: 1.57.57 (Build 04) Lifecycle Controller Firmware: 1.4.0.128
Question
•
Systems Management General
Community Accepted Solution
Hello, i've built a latest "smart bootable iso". after booting into it automatic firmware update does not start. i see "enter passphrase for encrypted config file:" prompt. Pressing "Enter" without any password starts upgrade process. But the problem is i need upgrade to start automatically. Ther
Question
•
Dell Repository Manager
Community Accepted Solution
Hi, I have just installed an ASHCI cluster running ASHCI OS 21H2 with the latest patches and the OMIMSWAC plugin 2.3.0. When trying to tun the HCP compliance I get the error "Unable to verify the HCP Compliance status of cluster nodes because either the OS installed on cluster nodes are unsuppo
Question
•
Systems Management General
Community Accepted Solution
Good morning. I would like to update the firmware on the R630 and R730xd servers. There are more than 150 of them in total, and I would like to perform the update on each of them separately, and separate these updates with an hour break. Is there a solution to automate this task from within Dell Op
Question
•
Dell OpenManage Essentials
Community Accepted Solution
I have a server that has a bad hard drive. I have setup OME and added the iDRAC to the device list. I noticed that the Alert Log had already captured the critical state of the hard drive and put it in the alert log before I setup the SNMP settings so I did not get an error email about this.I was u
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I received an alert in DOM saying that a plugin had an update. It was the Services plugin (2.0.1.620). I told took a snapshot of the VM and had it go ahead with the update. It shows downloading and has never come back. I checked the progress under the actual plugin and it shows download at 100%, but
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
Hi, We are running OME 3.9.0 and I have realized that when running the built in report for BIOS configuration it does not show any R750 servers even though we have several, I have several instances of OME and they same behaviour has been observed in all. Ultimately what I want to achieve
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
i buy Server Reuse Dell R720 but it No License iDrac7 i want Idrac Demo for test befor pay thank very
Question
•
Systems Management General
Community Accepted Solution
Hello all, I want to create a custom script to update our Servers iDRAC FW by calling the following command file: PS C:\Users\Administrator\Desktop> racadm -r 100.100.xx.xx -u root -p calvin --nocertwarn update -f iDRAC-with-Lifecycle-Controller_Firmware_XXXX_WN64_x.xx.00.00_X31.EXE
Question
•
Systems Management General
Community Accepted Solution
Hello,I have problem with creating RAID10 via Ansible. Everything works without problem. RAID 10 is successfully created, but main problem is, that I cannot "reconfigure" this raid afterwards. This option is missing. When I create this VD manually in BIOS, I can see this option. I tried many configu
Question
•
Systems Management General
Community Accepted Solution
Currently trying to update my bios from 1.4 to 2.11 however I cant seem to do so successfully. When booting into the Linux recovery with SUU it errors out with a memory error, so i tried through the lifecycle and cant use ftp.dell.com anymore and the new downloads.dell.com also doesn't work with ht
Question
•
Systems Management General
Community Accepted Solution
Hello I have been running Dell Server Update Utility(22.07.00) for about 1 hour now and 4 of the 20 updates are constantly saying "not started' with the dots next to it indicating it's waiting. Most say Successful or Reboot required, is it normal to take over an hour? Should I attempt to reboot?
Question
•
Systems Management General
Community Accepted Solution
Hello, https://linux.dell.com/repo/hardware/dsu/mirrors.cgi?osname=el8&basearch=x86_64&native=1 return error 500 again. My previous post is here
Question
•
Systems Management General
Community Accepted Solution
When I run the "Physical Disk Report" report on All devices,It seems that i'm missing information from 65 servers. (total of 173 servers)I can't find anything common between the missing servers, it seems to be across several different server models. Could this be something related to licensing on t
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I know I have more devices than this, but I'm only seeing 500 in the dashboard of the free version of OpenManage Enterprise. I can't find any documentation that verifies that this is a thing. Is there a limit, and where is that documented?
Question
•
Dell OpenManage Enterprise
Community Accepted Solution
I have a rack full of C6420's that I want to set to have identical BIOS settings. Now on older systems like the C6220 etc. I could set one system up how I wanted, save all the settings and then apply them to all the other systems using the setupbios tool. However, I can't find a way to do this on th
Question
•
Systems Management General
Community Accepted Solution
Hello. I think there a have a problem with linux.dell.com -> error 500 Internal error https://linux.dell.com/repo/hardware/dsu/mirrors.cgi?osname=el8&basearch=x86_64&native=1
Question
•
Systems Management General
Community Accepted Solution
Installed the OMEVV Plugin in OME and pointed it to our vCenter environment with admin creds. vSphere client plugin dashboard shows "Client is temporarily blocked for too many unsuccessful authentication attempt." Hosts tab thows a "vCenter with UUID XXXX-XXXX-XXXX-XXXX-XXXXXX is not registered. p
Question
•
OpenManage Integration for VMware vCenter
Community Accepted Solution
From what I read, both products do the same things. Or am I wrong. I currently have OMIVV installed (which has a cost to it), but the new OMEVV plugin for OME is free. Any insight would be appropriated.
Question
•
OpenManage Integration for VMware vCenter