Command List of OpenManage Server Administrator (OMSA)
Summary: This article introduces some of the command that is available on the OpenManage Server Administrator (OMSA).
This article applies to
This article does not apply to
Symptoms
Article Summary
This article provides some typical commands that can be used with OpenManage Server Administrator (OMSA).
Commands in this article are executed from a tool that allows CLI operation such as a command prompt, on the system where the OMSA is installed.
Table of Contents
1. Status Check
2. Gather and Clear a Log
3. Storage Related
4. Other
NOTE: This article provides only some typical commands. Please refer to the Command Line Interface Guide of each OMSA version for details.
Status Check
| Object | Command |
|---|---|
| Check the memory status | omreport chassis memory |
| Check each version | omreport system summary |
| Check slots | omreport chassis slots |
| Check each information including Tag | omreport chassis info |
| Check the BIOS settings | omreport chassis biossetup |
| Check the OMSA version | omreport about |
| Check the Power Supply Unit status | omreport chassis pwrsupplies |
| Check the power consumption | omreport chassis pwrmonitoring |
Gather and Clear a Log
| Object | Command |
|---|---|
| Clear hardware logs | omconfig system esmlog action=clear |
| Clear alert logs | omconfig system alertlog action=clear |
| View hardware logs | omreport system esmlog |
| View alert logs | omreport system alertlog |
| Collect a controller log | omconfig storage controller action=exportlog controller=controller ID |
Storage Related
| Object | Command |
|---|---|
| Rebuild virtual disk | omconfig storage pdisk action=rebuild controller=controller ID pdisk=physical disk ID |
| Check a virtual disk | omreport storage vdisk controller=controller ID |
| Check a disk that is assigned to a virtual disk | omreport storage pdisk controller=controller ID vdisk=virtual disk ID |
| Force a physical disk offline | omconfig storage pdisk action=offline controller=controller ID pdisk=physical disk ID |
Other
| Object | Command |
|---|---|
| Change the BIOS C-State settings | omconfig chassis biossetup attribute=cstates setting=disabled |
Cause
-
Resolution
-