How to Replace SSD Full on Latitude 14 7400 2-in-1

Learn to remove and install the SSD Full on your Latitude 7400 2-in-1 with this quick step-by-step video tutorial for effective maintenance.

Be sure to read and follow the safety guidelines to protect your computer from potential damage and ensure your personal safety. For more information about safety guidelines, see the Owner’s manual at: Dell.com/Support. Before you begin, turn off the computer and disconnect all the attached peripherals.

To remove the solid-state drive twenty-two thirty, loosen the eight screws on the base cover Pry the cover off the system to remove it. Find and unplug the battery cable. Identify the solid-state drive and loosen the three captive screws. Unlatch and lift the drive out of the system to remove it.

To reinstall the solid-state drive twenty-two thirty, place it back in the system and re-latch it. Tighten the three captive screws to secure the drive. Plug in the battery cable. Place the base cover back on the system and secure it with the eight screws. For more information about your Dell system, visit: Dell.com/Support.