Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Optiplex 580 System BIOS, A02
Εγκαταστάθηκε Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.Fixed BIOS flash part will be demaged after upgrade to A02 BIOS and CMOS battery power loss
[Root Cause] We do not check NvramLayoutChecksum in A02 BIOS. It causes CMOS data wrong if CMOS battery power lose.
[Solution] Check CMOS battery power status when system power on. If CMOS power lose, BIOS will load Failsafe Data(manufacturing defaults) to CMOS.
[Failure Symptom]
(1). Auto boot to setup.
(2). Shows "DQS training failed on previous boot, reverted to slower DRAM speed"
(3). After load setup default and reboot, system will prompt upgrade BIOS screen. Then BIOS will be erased and can't power on successfully again.
X30 BIOS release Notes:
01 Add warning help message for Computrace item
02 Fix DF390025 Computrace can't be changed from deactivated from activated by computrace application.
X29 BIOS release notes:
01 Fix: the boot order will return to default value after upgrade BIOS on windows.
02 Fix: DF357937 CCTK fails to enumerate the token
03 Add interface to support replace splash screen logo
04 Add interface to support 32bit event log clear utility
05 Fixed memory size change message popup when your enable surroundview
06 Fixed Checksum error after upgrade BIOS from A01
X28 BIOS release notes:
01 "1. When create event to full the storage, the Free size add Unread events is not equal to Total size in Events Log Statistics sub menu.
2. New event can't show on setup event log when gpnv eventlog area is full.
3. It will show one data ""FF/FF/FF FF:FF:FF"" in setup eventlog."
02 Fix: Hour values of Auto Power on time cannot save at (1,3,5,7,9.2n+1..23)
03 Fix: Set HDD password At IDE mode, press "ESC" key, cannot skip enter HDD password.
04 The USB mouse can't normal work on edit utility when using PS2 keyboard and USB mouse.
05 Add warning message and percentage tracking notice info during BIOS upgrade.
06 Remove intruder cable POST & eventlog error message. If intruder cable not connected, "Chassis Intrusion" item will not show on setup.
07 Add CRC8 check on DASH function.
08 Fix: System hang up when enabling DASH/ASF and then entering MFG mode.
10 Fix: No express service code in BIOS setup.
11 Calculate physically memory size by SPD detection.
12 Remove HDD Acoustic support
13 Support B95 CPU C5 state. Only disable AltVid when MB revision ID is 01.
14 Update RAID OPROM ver: V3.2.1540.31 (per AMD's request)
15 Fix FDE HDD can't boot in AHCI mode when FDE HDD is already encryption.
16 Fix: cctest -i inifile cannot change BIOS some values.
17 Add CompuTrace DA Tokens for Dell utility.
18 Add Dell Popup menu Security.
19 Fix: CCTK fails to set value for autoonhr on Optiplex 580.
Έλεγχος συμβατότητας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σαςΕισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος. Δείξτε μου πώς
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
2. Enhanced Dell Client Configuration Tool Kit interface
3. Enhanced the BIOS event log feature
4. Enhanced Auto Power On feature
5. Added One-time Boot Menu security feature
6. Added intruder detection function
7. Added support for AMD B95 CPU
8. Added warning message and percentage tracking for BIOS updating
9. Updated RAID Option ROM
10.Show express service code in BIOS SETUP
11.Adjust the method of whether memory size changed from check available memory to actual installed memory
12.Removed HDD Acoustic Support
Έκδοση
Ημερομηνία κυκλοφορίας
Τύπος λήψης
Κατηγορία
Σπουδαιότητα
RecommendedΚάνοντας λήψη αποδέχεστε τους όρους της Συμφωνίας άδειας χρήσης λογισμικού της Dell.
- Download file to Desktop
- Use one of the methods below to flash the Bios.
- Run the BIOS update utility from Windows environment
- Run the BIOS update utility from DOS environment (Non-Windows users)
Download file to Desktop
The file O580A02.EXE is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
- Click Download now.
The File Download window appears. - Click the Save button.
The Save As window appears. - Select Desktop using the drop-down menu to the right of Save in.
- Click the Save button.
A progress meter moves as the download is completed. - If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
Run the BIOS update utility from Windows environment
- Double click the Icon on your desktop labeled O580A02.EXE.
The Dell BIOS Flash window appears - Click the Continue button.
The message Pressing OK will close all applications, shut down Windows, Flash the BIOS, then reboot. appears. - Click the OK button.
The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS diskette. This executable file does not create the DOS system files.
- Copy the file O580A02.EXE to a bootable floppy.
- Boot from the floppy to the DOS prompt.
- Run the file by typing Y:\O580A02.EXE (where y is the drive letter where the executable is located).