Dell Dock WD19/WD22TB4 Firmware Update Utility
hi testing
Driver Id :
3WY24
Importance :
Recommended
Version :
01.01.00.01, 01.01.04.01
Latest version
Recommended version
Latest and Recommended version
Release Date :
24 Jun 2025
Download Type :
Firmware
Category :
Docks/Stands
This package contains the firmware update for Dell Dock WD19 and WD22TB4. The dock firmware update package contains utility and firmware for updating the dock components.
Download Files
File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
File Name: DellDockFirmwarePackage_WD19_WD22_HD22_WD25_SD25_01.01.04.exe
File size: 29.53 MB
To ensure the integrity of your download, please verify the checksum value.
MD5: cb43a3842b7b5f8be1f93f013b052489
SHA1: 0e6d25d258581ef7da0fbbc0aecfdaca132168cd
SHA-256: da2a748a0caa517a2e7cefd7f990bd6cee67227bef4649efd39313277aae8d12
Fixes & Enhancements
- Fixed the issue where the system does not switch from a wired to a wireless network or from a wireless to a wired network. This issue occurs after you unplug or plug-in the LAN cable when the system resumes from Modern Standby.
Important Information
- It is recommended that you install the latest version of the Thunderbolt driver (if the system supports) and BIOS before you install this package.
To find the Thunderbolt driver and BIOS, click This Device on the Drivers and Downloads page. From the Category dropdown, select Chipset for Thunderbolt driver and BIOS for the BIOS update. If you are not on the Drivers and Downloads page, identify your product.
- This update has both the updater tool and binary assembled in a single package that works without Internet access. This tool works with distributions containing Snap support.
To find the Thunderbolt driver and BIOS, click This Device on the Drivers and Downloads page. From the Category dropdown, select Chipset for Thunderbolt driver and BIOS for the BIOS update. If you are not on the Drivers and Downloads page, identify your product.
- This update has both the updater tool and binary assembled in a single package that works without Internet access. This tool works with distributions containing Snap support.
Compatible Systems
Supported Operating Systems
Windows 11 ARM64
Windows 11 ARM64 S-Mode
Windows 11
Windows 8.1, 64-bit
Windows 10, 64-bit
Installation instructions
Dell Firmware Update Utility Instructions
Download
1. Click Download File.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the information in the dialog window.
3. Download and install any prerequisites that are identified in the dialog window before proceeding.
4. Click the update button.
5. Follow the remaining prompts to perform the update.
Download
1. Click Download File.
2. When the File Download window is displayed, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the information in the dialog window.
3. Download and install any prerequisites that are identified in the dialog window before proceeding.
4. Click the update button.
5. Follow the remaining prompts to perform the update.
Applies to
Dell Wired Dock (WD19) Firmware Update Utility