Intel Optane Memory H20 with Solid State Storage Firmware Update

Restart required

Driver Id : 3WY2R

Importance : Critical

Version : 7004-7053, A02 Latest version Recommended version Latest and Recommended version

Release Date : 03 Oct 2023

Download Type : Firmware

Category : Storage

This package contains the firmware for Intel Optane Memory H20 with Solid State Storage 512 GB and 1 TB, Revision 7004-7053. Storage firmware is a microcode that is embedded on storage devices such as hard drives or solid state drives. The firmware manages the functionality of the devices. This update addresses the Dell Security Advisories (DSA). A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.

Download Files

File Format: This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.

File Name: Intel Optane Memory H20 with Solid State Storage 3WY2R_ZPE.exe

File size: 4.53 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: ea019936d75359f4c3304ca121e698a3

SHA1: 6ef01281126fe9fdb4bfec6e458811712461c2c3

SHA-256: e6de1f39da2eff2187a6e071eba22cd4e49dfb9bbf4f977f25c9c3d460009878

Download .EXE

Important Information

- It is recommended that you back up your data before performing this update. Do not interrupt your system during the firmware update process. Firmware update Installation time should take no longer than 1 minute.
- For IT admins, this update supports silent install. You can use Management Consoles or Dell tools such as Dell Command Update, SupportAssist, or Dell Business Client Catalog with Config Manager for silent installation.

Compatible Systems

Alienware Aurora R13

Inspiron 13 5310

Inspiron 14 5410 2-in-1

Inspiron 14 5410/5418

Inspiron 15 3511

Inspiron 15 5510/5518

Inspiron 3501

Inspiron 5301

Inspiron 5402/5409

Inspiron 5406 2-in-1

Inspiron 5502/5509

Inspiron 7300

Inspiron 7306 2-in-1

Inspiron 7400

Inspiron 7500

Inspiron 7501

Inspiron 7506 2-in-1

Inspiron 7706 2-in-1

Latitude 3320

Latitude 3410

Latitude 3420

Latitude 3510

Latitude 3520

Latitude 5320

Latitude 5420

Latitude 5520

Latitude 5521

OptiPlex 5090 Micro

OptiPlex 5090 Small Form Factor

OptiPlex 5090 Tower

OptiPlex 7090 Micro

OptiPlex 7090 Small Form Factor

OptiPlex 7090 Tower

OptiPlex 7090 Ultra

OptiPlex 7490 All-In-One

Vostro 13 5310

Vostro 14 5410

Vostro 15 5510

Vostro 5301

Vostro 5402

Vostro 5502

Vostro 7500

XPS 8950

Supported Operating Systems

Windows 11 ARM64

Windows 11 ARM64 S-Mode

Windows 11

Windows 10, 64-bit

Installation instructions

Dell Update Package Instructions

Note 1: It is recommended to back up the data in the computer and close all open applications. It is also recommended that you connect the power cable to the computer and disconnect all external storage devices.
Note 2: Your system requires a restart after installing the firmware.

Download
1. Click Download File.
2. When the File Download window is displayed, click Save to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read the information in the dialog window.
3. Download and install any prerequisites that are identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Note- If the Extract button is selected instead of Install, perform the following steps to complete the update:
a. Choose the extract location.
b. Close the Dell Update Package window.
c. From a command window, change directory to the location where files were extracted and run the following command: irmfuu_dell_win64.exe.
d. Follow the remaining prompts to perform the update.

Applies to

Intel Pyramid Glacier 32G + 1TB QLC PCIE NVME SSD w/Optane Memory

Intel Pyramid Glacier 32G + 512G QLC PCIE NVME SSD w/Optane Memory