Dell EMC iDRAC Service Module for Windows, v4.2.0.0
AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.iDRAC Service Module (iSM) is a lightweight software service that better integrates operating system (OS) features with iDRAC and can be installed on Dell’s yx2x or later generation of PowerEdge servers. iSM provides OS-related information to the iDRAC and adds capabilities such as LC log event replication into the OS log, WMI support (including storage), iDRAC SNMP alerts via OS, iDRAC hard reset and remote full Power Cycle. iSM automates SupportAssist report collection process for iDRAC leading to faster issue resolution. iSM has very little impact on the host processor and smaller memory footprint than "in-band" agents such as Dell EMC OpenManage Server Administrator (OMSA), thus expanding iDRAC management into supported host operating systems.
To view all drivers for your PowerEdge MX740C, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
OM-iSM-Dell-Web-X64-4.2.0.0-2581_A00.exe | 20.04 MB
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
An application
File Name:
OM-iSM-Dell-Web-X64-4.2.0.0-2581_A00.exe
File Size:
20.04 MB
Format Description
Application
To ensure the integrity of your download, please verify the checksum value.
MD5:
003f61a9ba5d4231c68e578a86084c6d
SHA1:
25622fd9a95661f6f0495721c526ee84f8a9c472
SHA-256:
a6129bcce4bdd71d95114b9b6788f1f90749bce7e1da82a4b0adda4a832103ce
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
-Removal of warning alerts for Windows Management Instrumentation (WMI) provider in the Windows EventViewer Application Logs.
-When both iDRAC Service Module (iSM) and OpenManage Server Administrator (OMSA) services are running on the host operating system; the iSM communication with iDRAC might stop and start every 5 hours 30 minutes automatically.
-When iSM is installed and if "OS information" feature is enabled, then IPv6 Default Gateway address and DNS server fields are not rendered in the iDRAC interfaces.
Enhancements:
-TLS 1.3 support - iSM is now capable of communicating with iDRAC over TLS 1.3 protocol.
-Isolation of OS-BMC-Passthrough Independent feature - iSM Limited Functionality mode support when iSM communication with iDRAC is not established.
-Software RAID enumeration - iSM enables enumeration of Software RAID PERC S130 and later series of controllers.
-Hyper Converged Infrastructure (HCI) log collection as part of SupportAssist collection(SAC).
Supported Operating Systems:
Microsoft Windows Server 2022 Datacenter
Microsoft Windows Server 2022 Standard
Microsoft Windows Server 2022 Essentials
Microsoft Windows Server 2019 Datacenter
Microsoft Windows Server 2019 Standard
Microsoft Windows Server 2019 Essentials
Microsoft Windows Server 2016 Datacenter
Microsoft Windows Server 2016 Standard
Microsoft Windows Server 2016 Essentials
Microsoft Windows 10 RS5 client
Microsoft Windows 11
Note: iDRAC Service Module 4.2.0.0 does not support PowerEdge R240, PowerEdge R340, PowerEdge T140, and
PowerEdge T340 servers on Microsoft Windows Server 2022 operating system
Read More
-Removal of warning alerts for Windows Management Instrumentation (WMI) provider in the Windows EventViewer Application Logs.
-When both iDRAC Service Module (iSM) and OpenManage Server Administrator (OMSA) services are running on the host operating system; the iSM communication with iDRAC might stop and start every 5 hours 30 minutes automatically.
-When iSM is installed and if "OS information" feature is enabled, then IPv6 Default Gateway address and DNS server fields are not rendered in the iDRAC interfaces.
Enhancements:
-TLS 1.3 support - iSM is now capable of communicating with iDRAC over TLS 1.3 protocol.
-Isolation of OS-BMC-Passthrough Independent feature - iSM Limited Functionality mode support when iSM communication with iDRAC is not established.
-Software RAID enumeration - iSM enables enumeration of Software RAID PERC S130 and later series of controllers.
-Hyper Converged Infrastructure (HCI) log collection as part of SupportAssist collection(SAC).
Supported Operating Systems:
Microsoft Windows Server 2022 Datacenter
Microsoft Windows Server 2022 Standard
Microsoft Windows Server 2022 Essentials
Microsoft Windows Server 2019 Datacenter
Microsoft Windows Server 2019 Standard
Microsoft Windows Server 2019 Essentials
Microsoft Windows Server 2016 Datacenter
Microsoft Windows Server 2016 Standard
Microsoft Windows Server 2016 Essentials
Microsoft Windows 10 RS5 client
Microsoft Windows 11
Note: iDRAC Service Module 4.2.0.0 does not support PowerEdge R240, PowerEdge R340, PowerEdge T140, and
PowerEdge T340 servers on Microsoft Windows Server 2022 operating system
Version
4.2.0.0, A00
Release date
25 Jan 2022
Download Type
Applications
Category
Systems Management
Importance
RecommendedDell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Other Available Versions
4.1.0.0, A0014 Jul 2021
3.6.0, A0022 Dec 2020
3.5.1, A0026 Mar 2020
3.4.0, A0005 Mar 2019
3.3.1, A0006 Dec 2018
3.2.0, A0017 May 2018
Supported Operating Systems
Windows 11
Windows Server 2019 LTSC
Windows Server 2022 LTSC
Windows Server 2016
Windows 10, 64-bit
Looking for a different OS? View the list of Dell supported operating systems
Applies to
iDRAC Service Module for Windows
Installation instructions
Download:
Download the webpack.
Installation:
Extract the contents to a folder.
Browse to iSM\windows folder and double click the iDRACSvcMod.msi.
Download the webpack.
Installation:
Extract the contents to a folder.
Browse to iSM\windows folder and double click the iDRACSvcMod.msi.
Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.