Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes: - Motor calibration corruption during a load: FSC 78B0 - LUN 1 command queuing (Dell iSCSI Bridge) - Code panic at End of Data (EOD) - Read Error Recovery Process (ERP): FSC 7015 - Write ERP: FSC 7067 - Stuck tape prevention due to false detection during Mid-Tape Recovery (MTR) - OpenSSL 'Heartbleed' vulnerability (CVE-2014-0160) - SSL/TLS MITM vulnerability (CVE-2014-0224)
Enhancements: - Added support for LTO7 - Library SNMP traps added (password changes and locked out accounts) - Serial number reporting in Log Page0x14h - Improvement to servo track positioning and errors: FSC's 2E0D and 78E3
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
Zip pack: --------- Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package 2. Click Continue. 3. Specify the location to unzip the files. 4. Click on the OK button to extract files. After the files are extracted the message all files were successfully unzipped will appear. 5. Click the OK button to exit from the installer.
Installation 1. Use ITDT to update the library and drive firmware