Dell Thunderbolt Dock TB16 Firmware Update Utility
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package contains the firmware update for Dell Thunderbolt Dock TB16. The dock firmware update package contains utility and firmware for updating the dock components.
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
- Fixed the issue where the system does not respond when running the Dell WD15 and TB16 dock firmware utility.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
- It is recommended that you install the latest BIOS version before installing this firmware. - For Dell XPS 9365 systems, you must use the previous version of this driver: https://dl.dell.com/FOLDER05355497M/1/DellDockingStationFwUp_1.0.2_12052018_TB16.exe
Download 1. Click Download File. 2. When the File Download window is displayed, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read the information in the dialog window. 3. Download and install any prerequisites that are identified in the dialog window before proceeding. 4. Click the update button. 5. Follow the remaining prompts to perform the update.
Post Installation 1. Power cycle the docking station after the firmware update is completed on Dell TB16, TB18, and WD15 docking stations. 2. Remove the docking station cable from the system. 3. Unplug the AC power adapter from the docking station. 4. Press and hold the power button for 30 seconds to drain any remaining power. 5. Plug in the AC power adapter to the docking station before connecting the system.