Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell Precision 7510/7710 System BIOS
Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.
To view all drivers for your Precision 7710, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...
This is the latest Dell validated version of this driver
This is not the latest Dell validated version of this driver
Precision_7x10_1.13.6.exe | 9.16 MBEnter the Service Tag of your device to check the compatibility of this download with your device.
This is a large file. Depending on your connection speed, it may take some time to download.
File Format:
CPG BIOS Executable for Windows/DOS
File Name:
Precision_7x10_1.13.6.exe
File Size:
9.16 MB
Format Description
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
To ensure the integrity of your download, please verify the checksum value.
MD5:
9f96c060d6262619adf422367308b663
SHA1:
b77e5e111ce5a6c5cd91d0a74cb9902842932fd9
SHA-256:
5f3bea1639337bcadba828df64a2531c464cd0e8f4ec2da5005c2847d61e38d6
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.
Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes:
- Fixed the issue where BitLocker cannot be enabled in systems running Windows 7 operating system.
- Fixed the issue where an error message is displayed when the hard disk drive (HDD) password is set. This issue occurs after the system resumes from Sleep mode.
- Fixed the issue where the BIOS recovery does not occur when using an interposer board with NVMe SSD.
- Fixed the issue where the BIOS recovery does not occur when using a USB device.
- Fixed the security issue with Intel Boot Guard code integrity chaining enforcement.
- Fixed the issue where the system does not respond when the Switchable Graphics mode is disabled.
- Fixed the issue where the system does not resume from Sleep mode when the Dell TB16 dock is connected. This issue occurs when the Switchable Graphics mode is disabled.
- Fixed the issue where the system does not respond when the adapter is plugged or unplugged, and the Switchable Graphics mode is disabled.
Enhancements:
- Updated the processor microcode.
- Updated the Absolute Home & Office BIOS Persistence module.
Read More
- Fixed the issue where BitLocker cannot be enabled in systems running Windows 7 operating system.
- Fixed the issue where an error message is displayed when the hard disk drive (HDD) password is set. This issue occurs after the system resumes from Sleep mode.
- Fixed the issue where the BIOS recovery does not occur when using an interposer board with NVMe SSD.
- Fixed the issue where the BIOS recovery does not occur when using a USB device.
- Fixed the security issue with Intel Boot Guard code integrity chaining enforcement.
- Fixed the issue where the system does not respond when the Switchable Graphics mode is disabled.
- Fixed the issue where the system does not resume from Sleep mode when the Dell TB16 dock is connected. This issue occurs when the Switchable Graphics mode is disabled.
- Fixed the issue where the system does not respond when the adapter is plugged or unplugged, and the Switchable Graphics mode is disabled.
Enhancements:
- Updated the processor microcode.
- Updated the Absolute Home & Office BIOS Persistence module.
Version
1.13.6, 1.13.6
Release date
13 Jul 2017
Download Type
System BIOS
Category
BIOS
Importance
CriticalDell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Important Information
Once the BIOS is updated, you cannot downgrade it to a version before 1.6.6.
Other Available Versions
1.31.307 Apr 2023
1.30.320 Dec 2022
1.29.316 Nov 2022
1.28.312 Aug 2022
1.27.312 Jul 2022
1.26.320 May 2022
1.25.313 Jan 2022
1.24.309 Nov 2021
1.23.304 Oct 2021
1.22.530 Jul 2021
1.21.319 Oct 2020
1.20.318 Jun 2020
1.19.317 Oct 2019
1.18.516 Oct 2019
1.17.731 May 2019
1.16.312 Oct 2018
1.15.406 Feb 2018
1.14.430 Aug 2017
1.12.416 May 2017
1.10.709 Mar 2017
1.9.528 Dec 2016
1.8.324 Oct 2016
1.7.326 Sep 2016
01.06.0609 Aug 2016
1.05.0407 Jun 2016
1.04.1406 May 2016
1.3.1229 Feb 2016
1.3.1001 Feb 2016
1.2.018 Nov 2015
1.1.009 Nov 2015
Supported Operating Systems
BIOS
Looking for a different OS? View the list of Dell supported operating systems
Applies to
Precision 7510 system BIOS
Precision 7710 system BIOS
Installation instructions
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Precision_7510_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Precision_7510_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes, and reboot the system.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Precision_7510_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Precision_7510_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes, and reboot the system.
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.Drivers help and tutorials
For more downloads go to the Drivers and downloads.
For help on using the information on this page, please visit Driver Help and Tutorials.