Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This package provides the new firmware for power supplies and is supporting Delta 750W PSU. (PN: 4V8KD,5RHVV,V1YJ6,G6W6K).
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
[For 4V8KD,5RHVV,V1YJ6,G6W6K] - Performance improvement during load changes.
Dell Technologies recommends applying this update during your next scheduled update cycle. The update contains changes to maintain overall system health. It ensures that the system software remains current and compatible with other system modules (firmware, BIOS, drivers, and software) and may include other new features.
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to ten minutes to continue updating the firmware. Once the firmware update is complete, the managed system reboots automatically.
CAUTION! Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit into an irrecoverable state and the managed system does not boot.
CAUTION: Performing an AC power cycle or cold boot during a power supply firmware update, forces the power supply unit (PSU) into an irrecoverable state and the managed system does not boot.
IMPORTANT: After a successful power supply firmware download, the managed system turns off for a duration ranging from three to twenty minutes to continue updating the firmware. It is imperative not to interrupt/restart manually during this time. Update time can vary but should be approximately 10 minutes. Margin should be added to assure the Dell Update Package (DUP) is not interrupted (some DUPs may take up to 20 minutes). Once the firmware update is complete, the managed system reboots automatically.
Instructions for ".BIN" file:
Download 1. Click the Download Now link to download the file. 2. When the "File Download" window appears, click Save to save the file to your hard drive.
Installation 1. Read the release information presented by executing the ".BIN" file with "--version" command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ".BIN" file from the shell. 4. Follow the remaining prompts to perform the update. 5. Upon successful completion the DUP will prompt to reboot system. 6. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 7. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 8. Once the flashing process is complete the system should power back up and boot to OS.
Instructions for ".EXE" file:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update. 6. Upon successful completion the DUP will prompt to reboot system. 7. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 8. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 9. Once the flashing process is complete the system should power back up and boot to OS.
GnuPG Signature of Dell Update Package Instructions for ".sign" file:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to import once on your system.) 2. Verify the Dell Update Package by using its signature file. 3. Upon successful completion the DUP will prompt to reboot system. 4. Restart your system. After the system restarts, DUP will enter USC to complete the flashing of the PSU firmware. 5. The actual flash begins after DUP exits USC. Please do not power off or power cycle the system as this can result in a non-functional power supply. 6. Once the flashing process is complete the system should power back up and boot to OS.