Dell Latitude E5410 System BIOS

Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

hi testing

Driver Id : R313668

Importance : Recommended

Version : A11, A11 Latest version Recommended version Latest and Recommended version

Release Date : 27 Sep 2011

Download Type : System BIOS

Category : BIOS

This package provides the Dell System BIOS update and is supported on Dell Latitude E5410 for Windows and DOS Operating Systems.

Download Files

File Format: This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.

File Name: E5410A11.exe

File size: 2.66 MB

To ensure the integrity of your download, please verify the checksum value.

MD5: c06da1057efedb3d89899a324980ce36

Download .EXE

Fixes & Enhancements

Fixes - Fixed fail to create or change Hard Drive password from DDPA 2.0 - Addressed FDE hard drive detection issue - Fixed USB data transfer issue lockup with iTunes application - Fixed the issue where system can't be shutdown with bitlocker enable Enhancements - Added support of Signed Firmware BIOS

Installation instructions

BIOS Update Executable for Windows/DOS Download 1. Click Download File, to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive. Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update BIOS while system startup screen. 3. After BIOS update finished, system will auto reboot to take effect. Run the BIOS update utility from DOS environment (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. DOS System will auto restart and update BIOS while system startup screen. 5. After BIOS update finished, system will auto reboot to take effect. -------------------------------------------------------------------------------- Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.o provide a bootable DOS diskette. This executable file does not create the DOS system files.

Copy the file E5410A11.exe to a bootable floppy.

Boot from the floppy to the DOS prompt.

Run the file by typing Y:\E5410A11.exe (where y is the drive letter where the executable is located).

Dell Latitude E5410 System BIOS

Download Files

Fixes & Enhancements

Compatible Systems

Supported Operating Systems

Installation instructions