Dell EMC Networking N2000 Series Firmware Version 6.7.0.4

Restart required AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Mixed Stacking – N2000 series switches with N2128PX-ON not Supported in OS6.7.0.3

If N2000 series switch has an earlier version of firmware (6.0.0.7 or 6.0.0.8 or 6.0.1.3), upgrade switch to the latest version of firmware 6.6.0.24 as it contains multiple bug fixes.

New CPLD version 20 is available in release 6.5.1.1 and later (6.6.0.24) for N2000 Series switches. After upgrading the switches to FW version 6.5.1.1 and later (6.6.0.24), the CPLD can be updated to version 20 from CLI using the command - "update cpld". To update CPLD on stack members, run - 'update cpld ' command from stack master. Please DO NOT power-cycle the switch when CPLD update is in progress. After CPLD update is complete, the switch will reset on it's own. Verify CPLD Version with the command - 'show version' from CLI after switch boot-up completes.

****Below information is applicable ONLY for N2000 switches upgraded to 6.6.0.24 and CPLD Version 15 or 17 or 20 and attempt to downgrade to any prior FW version****

Downgrading N3000 and N2000 Series switches from firmware version 6.6.0.24 with the updated CPLD version 15 or 17 or 20 (Verify CPLD Version with the command “show version” from CLI) to any prior 6.x.x.x version can ONLY be done by downgrading via interim FW version B.6.3.2(N3000_N2000vB.6.3.2.stk) attached to zip file.

With interim FW image version B.6.3.2 running, the switches should be downgraded to CPLD version 13 first before downgrading to any 6.x.x.x version. Please follow the instructions documented in the “Firmware Downgrade” section of "Upgrading Dell EMC Networking N2000 Series Switches From Version 6.x.x.x to 6.6.0.24.pdf" file.

Please refer to the Release Notes for fixes and enhancements available in this release. "Release Notes" are included in the zip file - "Dell_EMC_Networking_6.6.0.24_6.6.0.54_ReleaseNotes_N1100_N1500_N2000_N2128PX_N3000E_N3132PX.pdf".
To view all drivers for your PowerSwitch N2000 Series, go to Drivers and downloads.
Recommended
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

N2000v6.7.0.4.A00.zip | 65.46 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Download Go to Latest Version
Show details | Download current version instead | View other downloadable formats
File Format: Extracts files directly to local disk
File Name: N2000v6.7.0.4.A00.zip
File Size: 65.46 MB
Format Description
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
502da93edaaa6c93905385f47be4c0ca
SHA1:
d4b412a2b6ceb5acb653eb442922717187a967a4
SHA-256:
c02a051556df30f29f1172a1a56ace16218a06f0bccdde452ee4630c2738dd56

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Enhancements
IPv6 VRF support with Linux master device implementation
Added ERSPAN to support mirroring across a routed network
Cisco ISE integration / Downloadable ACLs
Wake on LAN to wake dormant PCs by sending magic packet
MAC notification to notify about the stations learned or aged out
HTTPS Redirect URL
Upgrade ONIE across stack
Terminate Telnet session after 3-failed login attempts
MAC request format to have password parameter
Captive Portal enhancements
Port breakout interop issues and AN
IPv4 VRF improvements with Linux master device implementation
Spanning Tree BPDUs on MAB Authenticated ports
OpenSSL 1.1.1 version to address vulnerabilities
Removed Racial and Non-Inclusive words from documentation and CLI strings. Some CLI strings, which are in conformance with standards, remain.

Fixes
None
Read More

Version

6.7.0.4, A00

Release date

24 Jun 2021

Download Type

Firmware

Category

Network, Ethernet & Wireless

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
View Important Information
File Format: Ext-Tech-Docs
File Name: Dell_EMC_Networking_6.7.0.4_6.7.0.34_ReleaseNotes (N1100 N1500 N2000 N2128PX N3000E N3132PX Series Switches).pdf
File Size: 1.7 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
To ensure the integrity of your download, please verify the checksum value.
MD5:
37fb9c2fb9ff28b2245fa423f4f92495
SHA1:
44b3b3a09d66bc05f48af3c430e3eb1a20a29d86
SHA-256:
c15ee080b682aab27a1630cea07e2bd6b433bdff07335bc2a21329645860b308

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All
Enhancements
IPv6 VRF support with Linux master device implementation
Added ERSPAN to support mirroring across a routed network
Cisco ISE integration / Downloadable ACLs
Wake on LAN to wake dormant PCs by sending magic packet
MAC notification to notify about the stations learned or aged out
HTTPS Redirect URL
Upgrade ONIE across stack
Terminate Telnet session after 3-failed login attempts
MAC request format to have password parameter
Captive Portal enhancements
Port breakout interop issues and AN
IPv4 VRF improvements with Linux master device implementation
Spanning Tree BPDUs on MAB Authenticated ports
OpenSSL 1.1.1 version to address vulnerabilities
Removed Racial and Non-Inclusive words from documentation and CLI strings. Some CLI strings, which are in conformance with standards, remain.

Fixes
None
6.7.1.24, A1426 May 2024
6.7.1.22, A1307 Aug 2023
6.7.1.21, A1228 Mar 2023
6.7.1.20, A1119 Dec 2022
6.7.1.17, A1030 Sep 2022
6.7.1.15, A0910 Aug 2022
6.7.1.13, A0701 Jul 2022
6.7.1.10, A0628 May 2022
6.7.1.9, A0525 Mar 2022
6.7.1.8, A0407 Mar 2022
6.7.1.6, A0307 Jan 2022
6.7.1.4, A0229 Nov 2021
6.7.1.1, A0127 Sep 2021
6.6.0.24, A0802 Jul 2020
6.6.0.23, A0708 Jun 2020
6.6.0.21, A0612 May 2020
6.6.0.17, A0508 Apr 2020
6.6.0.15, A0410 Feb 2020
6.6.0.13, A0303 Dec 2019
6.6.0.10, A0230 Oct 2019
6.6.0.7, A0101 Oct 2019
6.6.0.2, A0003 Jun 2019
6.3.3.1409 Feb 2018
6.3.3.10, A3103 Nov 2017
6.3.3.9, A3013 Oct 2017
6.3.3.8, A2911 Sep 2017
6.3.2.7, A2831 May 2017
6.3.2.6, A2711 May 2017
6.3.2.4, A2607 Apr 2017
6.3.2.3, A2525 Feb 2017
6.3.1.13, A2415 Jan 2017
6.3.1.11, A2309 Dec 2016
6.3.1.8, A2204 Oct 2016
6.3.0.19, A2120 Sep 2016
6.3.0.18, A2004 Aug 2016
6.3.0.16, A1928 Jul 2016
6.3.0.15, A1717 Jun 2016
6.3.0.9, A1616 May 2016
6.3.0.6, A1520 Apr 2016
6.2.7.2, A1030 Nov 2015
6.2.6.6, A0708 Sep 2015
6.2.1.6, A0629 May 2015
6.2.0.5, A0510 Mar 2015
6.1.2.4, A0414 Nov 2014
6.1.1.7, A0305 Sep 2014
6.1.0.6, A0216 Jul 2014
6.1.0.1, A0106 Jun 2014
6.0.1.3, A0028 Feb 2014
Dell N2024
Dell N2024P
Dell N2048
Dell N2048P
KIT,SWT BOX,24PRT,1GBE,N2024
(1) Download the zip file - N2000v6.7.0.4.A00.zip
(2) Extract the image file "N2000v6.7.0..4.stk" from the zip file
(3) Install the image to the switch by following the upgrade procedure "Upgrading Dell EMC Networking N2000-ON Series Switches to Version 6.7.0.4.pdf" extracted from zip file.

Need help with network connection issues?

Find a solution in Dell's network troubleshooting and usage guide.

Drivers help and tutorials