Dell PowerConnect 7000 Series, Firmware Version 5.1.7.5,A20
Restart requiredAUTO INSTALLEDThis file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.7.5_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.7.5 Firmware.pdf".
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
Sign in to Windows as an admin to use automatic scan. If your're already signed in as an admin and seeing this message, please reboot.Your system is managed by your IT admin and features might be limited.
Find more updates. Use SupportAssist to find all the latest driver updates for your device.
Fixes & Enhancements
Fixes available in this release: CaseID Summary 809263 Add dhcp option 42 support 832552 M6348 running 5.1.5.1 DIR timestamps and PowerSupply output incorrect 841131 PCT8024-F stack: Not possible to create port-channels on combo ports 822311 PCM8024 v5.1.4.5 management SSH connetions time out in simple mode 839617 M8024-K External uplink Ethernet ports on standby member are not listed under stack-ports. 842815 5.1.6.1-SNMP MIB for Power Supply and Fan Tray info of all units in the stack 842812 5.1.6.1 - boxServicesTempSensorsTable MIB walk doesn't match with "show system temperature" 844287 5.1.6.1 - Incorrect status message when downloading image via FTP 844298 5.1.6.1 - Terminal length CLI command suggest to use range <31-1> 841131 PC8024F : Unable to add ports in to port-channel across the stack when ports are down (tranceivers not inserted in to ports) 846490 PCM6348: 'show passwords result' output is incorrect 846987 PCM6220: After deletion of vlan, the member port is not added back into the default vlan 846203 Link flap when attempt to change the speed which is not supported 849935 Unable to enable/disable HTTPS from WebUI. 848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not 848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server 848723 PCM6220: Inconsistent error message between WebUI and CLI for GARP Join Timer 845272 5.1.6.1 - PC7000/PC8024/M-Series - Multiple OpenSSH Vulnerabilities 848639 PCM6348: WebUI pops up error on adding SNMP community but still adds the community 859309 5.1.5.1 - Stack failover forces the combo ports of the standby unit to "Duplex Full" 859311 5.1.5.1 - Unable to remove duplex setting on switch-ports 870039 POODLE Vulnerability 871623 PCM8024-k - Inconsistency in output of 'show link-dependency' 870337 N20xx v6.1.1.7 port-channel misconfigured after reloading the switch 847890 User password length is not checked when using the Easy Setup Wizard.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Please refer to the Release Notes for fixes available in this release. "Release Notes" are included in the zip file - "PowerConnect_5.1.7.5_Release_Notes".
Please follow the detailed software update instructions included in the zip file - "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.7.5 Firmware.pdf".
Fixes available in this release: CaseID Summary 809263 Add dhcp option 42 support 832552 M6348 running 5.1.5.1 DIR timestamps and PowerSupply output incorrect 841131 PCT8024-F stack: Not possible to create port-channels on combo ports 822311 PCM8024 v5.1.4.5 management SSH connetions time out in simple mode 839617 M8024-K External uplink Ethernet ports on standby member are not listed under stack-ports. 842815 5.1.6.1-SNMP MIB for Power Supply and Fan Tray info of all units in the stack 842812 5.1.6.1 - boxServicesTempSensorsTable MIB walk doesn't match with"show system temperature" 844287 5.1.6.1 - Incorrect status message when downloading image via FTP 844298 5.1.6.1 - Terminal length CLI command suggest to use range <31-1> 841131 PC8024F : Unable to add ports in to port-channel across the stack when ports are down (tranceivers not inserted in to ports) 846490 PCM6348: 'show passwords result' output is incorrect 846987 PCM6220: After deletion of vlan, the member port is not added back into the default vlan 846203 Link flap when attempt to change the speed which is not supported 849935 Unable to enable/disable HTTPS from WebUI. 848345 Debug logs prints a wrong message. It says the "New user has been added" when it is not 848996 gvrp registration-forbid is not working if there are two interfaces b/w GVRP client and Server 848723 PCM6220: Inconsistent error message between WebUI and CLI for GARP Join Timer 845272 5.1.6.1 - PC7000/PC8024/M-Series - Multiple OpenSSH Vulnerabilities 848639 PCM6348: WebUI pops up error on adding SNMP community but still adds the community 859309 5.1.5.1 - Stack failover forces the combo ports of the standby unit to "Duplex Full" 859311 5.1.5.1 - Unable to remove duplex setting on switch-ports 870039 POODLE Vulnerability 871623 PCM8024-k - Inconsistency in output of 'show link-dependency' 870337 N20xx v6.1.1.7 port-channel misconfigured after reloading the switch 847890 User password length is not checked when using the Easy Setup Wizard.
(1) Download the zip file - PC7000v5.1.7.5a20.zip (2) Extract the image file "PC7000_M6348v5.1.7.5.stk" from the zip file (3) Install the image to the switch by following the upgrade procedure "Upgrading PowerConnect Switches from Version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.7.5 Firmware.pdf" extracted from zip file.
Reboot will be required
Need help with network connection issues?
Find a solution in Dell's network troubleshooting and usage guide.