ECS: SSL-certifikatværktøj til data og administration

Oversigt: ECS-certifikatværktøjet kan hjælpe dig med at overføre SSL-certifikater til ECS data- og administrationsgrænsefladerne.

Denne artikel gælder for Denne artikel gælder ikke for Denne artikel er ikke knyttet til et bestemt produkt. Det er ikke alle produktversioner, der er identificeret i denne artikel.
Udforsk andre ressourcer

Instruktioner

Siden udgivelsen af ObjectScale er værktøjet blevet omskrevet på grund af forskellige pythonversioner mellem ECS og ObjectScale. Den seneste version er ecs_certificate_tool-1.9.  Værktøjet er vedhæftet i KB

 

Bemærk: DNS er et krav til ECS / OBS Certificate Tool.
Sørg for, at der oprettes DNS-poster til datagrænsefladerne, før du bruger ECS-certifikatværktøjet. Uden disse poster mislykkes certifikatgenereringsscriptet, da det er afhængigt af DNS-opløsning til datagrænsefladerne.

 

Index:

Installation

  1. Download den nyeste version af værktøjet, der er vedhæftet denne vidensartikel
  2. Upload værktøjet til /home/admin på en af ECS-noderne.
  3. Skift til /home/admin mappe og udpak pakken.
$ cd /home/admin
$ unzip ecs_certificate_tool-1.7.zip
  1. Skift til biblioteket med certifikatværktøjet.
$ cd ecs_certificate_tool-1.7
  1.  Hvis du bruger OBS version 4.0 eller nyere, skal du bruge obs_certificate_tool.py  
    admin@ecsnode2:~/ecs_certificate_tool-1.9> ls -lrt
total 116
drwxr-xr-x  3 admin users    17 Nov 25 15:04 obs_libs
drwxr-xr-x 18 admin users  4096 Nov 25 15:04 ecs_libs
-rw-r--r--  1 admin users 50528 Nov 25 15:04 ecs_certificate_tool.py
-rw-r--r--  1 admin users   873 Nov 25 15:04 config.ini
-rw-r--r--  1 admin users 53206 Nov 25 19:41 obs_certificate_tool.py
-rw-r--r--  1 admin users  1160 Nov 27 18:05 README.md
  2. Konfigurer legitimationsoplysninger til rodbrugergrænsefladen for det værktøj, der skal bruges.
Kommando:
$ python ecs_certificate_tool.py configure_credentials
Eksempel: 
admin@:~/ecs_certificate_tool-1.7> python ecs_certificate_tool.py configure_credentials
ecs_certificate_tool v1.7

=======> Configuring Credentials

Please enter the password for the root management user:
Authenticating using configured credentials..PASS

Successfully configured credentials!
  1. Brug certifikatværktøjet til at generere din SAN-konfiguration (Subject Alternative Name). Du skal tilføje ikonet manuelt b>fqdn og ip-address af din belastningsbalancer, hvis du bruger en.
Kommando: 
python ecs_certificate_tool.py generate_san
Eksempel: 
$ python ecs_certificate_tool.py generate_san
ecs_certificate_tool v1.7
log_file: /home/admin/ecs_certificate_tool-1.7/certificate_tool.log

======================================================================
Generating SAN (subject alternative name) config.
======================================================================

----------------------------------------------------------------------
Setting DATA_SUBJECT_ALTERNATIVE_NAME config
----------------------------------------------------------------------
Set DNS_NAMES to :
['layton-ex3000.example.com',
 'ogden-ex3000.example.com',
 'orem-ex3000.example.com',
 'provo-ex3000.example.com',
 'sandy-ex3000.example.com']

Set IP_ADDRESSES to :
['192.0.2.104',
 '192.0.2.105',
 '192.0.2.106',
 '192.0.2.107',
 '192.0.2.108']

----------------------------------------------------------------------
Setting MANAGEMENT_SUBJECT_ALTERNATIVE_NAME config
----------------------------------------------------------------------
Set DNS_NAMES to :
['layton-ex3000.example.com',
 'ogden-ex3000.example.com',
 'orem-ex3000.example.com',
 'provo-ex3000.example.com',
 'sandy-ex3000.example.com']

Set IP_ADDRESSES to :
['192.0.2.104',
 '192.0.2.105',
 '192.0.2.106',
 '192.0.2.107',
 '192.0.2.108']

Wrote changes to: /home/admin/ecs_certificate_tool-1.7/config.ini
DONE

Konfiguration

  • Ikonet config.ini Filen er det sted, hvor du angiver alle værdierne for dit certifikat.
  • Hvis du ikke vil bruge en værdi, skal du lade den være tom som i eksemplet nedenfor:
# optional unit name
ORGANIZATIONAL_UNIT_NAME =
  • Her er et eksempel på, hvad standardindstillingen er: config.ini Ligner:
[GENERAL]
COMMON_NAME = *.ecs.example.com
# Two letter country name
COUNTRY_NAME = US
LOCALITY_NAME = Salt Lake City
STATE_OR_PROVINCE_NAME = Utah
STREET_ADDRESS = 123 Example Street
ORGANIZATION_NAME = Example Inc.
# optional unit name
ORGANIZATIONAL_UNIT_NAME =
# optional email address
EMAIL_ADDRESS = example@example.com

[UI_CREDENTIALS]
USERNAME = root
PASSWORD = ChangeMe

[SELF_SIGNED]
# 1825 days = 5 years
VALID_DAYS = 1825

[DATA_SUBJECT_ALTERNATIVE_NAME]
DNS_NAMES = node1.ecs.example.com node2.ecs.example.com node3.ecs.example.com
IP_ADDRESSES = 192.0.2.1 192.0.2.2 192.0.2.3 192.0.2.4

[MANAGEMENT_SUBJECT_ALTERNATIVE_NAME]
DNS_NAMES = node1.ecs.example.com node2.ecs.example.com node3.ecs.example.com
IP_ADDRESSES = 198.51.100.1 198.51.100.2 198.51.100.3 198.51.100.4

[ADVANCED]
# Probably dont use these unless you really know what your doing
SERIAL_NUMBER =
SURNAME =
GIVEN_NAME =
TITLE =
GENERATION_QUALIFIER =
X500_UNIQUE_IDENTIFIER =
DN_QUALIFIER =
PSEUDONYM =
USER_ID =
DOMAIN_COMPONENT =
JURISDICTION_COUNTRY_NAME =
JURISDICTION_LOCALITY_NAME =
BUSINESS_CATEGORY =
POSTAL_ADDRESS =
POSTAL_CODE =
INN =
OGRN =
SNILS =
UNSTRUCTURED_NAME =

Sådan får du vist dine aktuelle certifikater:

  1. Kør ecs_certificate_tool view_certs Drift.
Kommando: 
$ python ecs_certificate_tool.py view_certs
Eksempel: 
ecs_certificate_tool v7.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

Authenticating using configured credentials..PASS

----------------------------------------------------------------------
View certificates
----------------------------------------------------------------------

======================================================================
Data Certificate:
======================================================================

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            3b:0f:a3:e2:fa:0a:90:14:86:6c:a3:3a:26:5c:0b:8d:6e:18:7d:eb
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Validity
            Not Before: Oct 17 18:35:06 2020 GMT
            Not After : Oct 16 18:35:06 2025 GMT
        Subject: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:ad:13:ea:31:bb:13:30:fc:ad:75:1a:84:16:53:
                    76:9d:0d:96:60:69:04:70:ad:00:76:c5:e4:f0:39:
                    3d:e3:9b:2e:2a:06:0b:ae:29:16:22:69:73:1d:2b:
                    27:73:68:7a:42:62:84:37:9b:7e:7f:60:48:aa:80:
                    14:96:07:52:ac:d5:dd:1f:af:59:3b:88:5e:15:43:
                    f1:9e:29:91:0a:6d:19:8e:41:4b:3c:9f:0c:64:16:
                    5c:c6:61:a6:c7:28:a9:9e:14:81:10:7e:4a:4f:25:
                    93:20:d9:5b:fe:b3:ac:56:28:f0:89:2c:e3:97:18:
                    df:1d:e3:1b:6d:c5:08:fb:d6:97:81:82:b1:6b:33:
                    45:1d:de:7a:30:5c:6d:4a:70:96:06:f8:05:48:a7:
                    89:ad:ce:db:99:f2:61:88:92:75:e5:cf:d2:b1:2c:
                    28:60:6f:5e:ba:6c:02:f4:12:90:be:eb:6d:48:ae:
                    b2:3a:6e:76:a6:02:b1:9e:f7:95:2c:65:8a:80:1a:
                    64:52:ec:f5:0c:2b:c8:87:a7:e5:4d:f7:34:60:a5:
                    49:03:30:27:10:8d:ad:4e:92:52:8b:d9:6b:ad:2d:
                    15:60:a5:26:fc:1b:1d:69:9f:5c:a3:0f:d9:cb:b9:
                    1d:68:30:6c:c8:ca:e1:71:4b:88:bd:98:d7:10:ae:
                    89:c5
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Alternative Name:
                DNS:node1.ecs.example.com, DNS:node2.ecs.example.com, DNS:node3.ecs.example.com, IP Address:192.0.2.1, IP Address:192.0.2.2, IP Address:192.0.2.3, IP Address:192.0.2.4
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Key Usage: critical
                Digital Signature, Non Repudiation, Key Encipherment
            X509v3 Extended Key Usage: critical
                TLS Web Server Authentication
            X509v3 Authority Key Identifier:
                0.
    Signature Algorithm: sha256WithRSAEncryption
         33:85:7e:3b:fd:fd:3a:35:97:17:11:2d:4d:e1:7e:03:35:82:
         8a:47:30:ed:b2:f9:1b:b4:22:a2:60:00:b5:9c:aa:6c:0d:e7:
         ea:c7:0a:e6:05:24:7d:bd:50:ab:23:9b:16:6a:e7:be:e9:21:
         26:61:0e:e5:e1:62:7e:d8:01:3a:3e:19:14:89:c2:ef:62:a0:
         17:5c:80:2b:24:6b:96:73:fa:b0:8f:4d:09:0e:69:4f:72:f0:
         4d:b1:13:8d:90:4e:18:4b:82:be:fd:48:b0:c2:9d:9c:43:d9:
         d9:73:e6:15:88:79:1f:3e:13:ec:c9:6f:5f:2a:08:7c:a7:5d:
         b4:e1:50:0f:3c:49:e3:e4:9f:8f:dd:e0:b5:b5:2d:d8:2d:29:
         94:2d:4b:66:20:36:f0:ae:3a:ae:a4:c5:91:3c:f4:2a:d6:f5:
         24:ec:7b:3a:96:d6:75:91:f9:b3:1c:8a:93:87:1b:d7:f2:f7:
         72:4d:0c:02:b9:2e:ab:f6:76:ca:c5:74:39:e0:a0:54:2b:85:
         4d:dd:e6:c7:fc:d0:e7:bc:3e:9e:98:19:e5:ed:ad:5f:4b:ea:
         20:17:c5:23:eb:09:ad:8e:13:57:75:78:f9:68:bb:18:34:fc:
         3a:26:94:90:5e:ed:a6:09:bb:14:5c:bd:2e:d3:5b:c4:43:08:
         66:95:e7:ee


======================================================================
Management Certificate:
======================================================================

Certificate:
    Data:
        Version: 3 (0x2)
        Serial Number:
            3b:0f:a3:e2:fa:0a:90:14:86:6c:a3:3a:26:5c:0b:8d:6e:18:7d:eb
    Signature Algorithm: sha256WithRSAEncryption
        Issuer: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Validity
            Not Before: Oct 17 18:35:06 2020 GMT
            Not After : Oct 16 18:35:06 2025 GMT
        Subject: CN=*.ecs.example.com, C=US, L=Salt Lake City, ST=Utah/street=123 Example Street, O=Example Inc./emailAddress=example@example.com
        Subject Public Key Info:
            Public Key Algorithm: rsaEncryption
                Public-Key: (2048 bit)
                Modulus:
                    00:ad:13:ea:31:bb:13:30:fc:ad:75:1a:84:16:53:
                    76:9d:0d:96:60:69:04:70:ad:00:76:c5:e4:f0:39:
                    3d:e3:9b:2e:2a:06:0b:ae:29:16:22:69:73:1d:2b:
                    27:73:68:7a:42:62:84:37:9b:7e:7f:60:48:aa:80:
                    14:96:07:52:ac:d5:dd:1f:af:59:3b:88:5e:15:43:
                    f1:9e:29:91:0a:6d:19:8e:41:4b:3c:9f:0c:64:16:
                    5c:c6:61:a6:c7:28:a9:9e:14:81:10:7e:4a:4f:25:
                    93:20:d9:5b:fe:b3:ac:56:28:f0:89:2c:e3:97:18:
                    df:1d:e3:1b:6d:c5:08:fb:d6:97:81:82:b1:6b:33:
                    45:1d:de:7a:30:5c:6d:4a:70:96:06:f8:05:48:a7:
                    89:ad:ce:db:99:f2:61:88:92:75:e5:cf:d2:b1:2c:
                    28:60:6f:5e:ba:6c:02:f4:12:90:be:eb:6d:48:ae:
                    b2:3a:6e:76:a6:02:b1:9e:f7:95:2c:65:8a:80:1a:
                    64:52:ec:f5:0c:2b:c8:87:a7:e5:4d:f7:34:60:a5:
                    49:03:30:27:10:8d:ad:4e:92:52:8b:d9:6b:ad:2d:
                    15:60:a5:26:fc:1b:1d:69:9f:5c:a3:0f:d9:cb:b9:
                    1d:68:30:6c:c8:ca:e1:71:4b:88:bd:98:d7:10:ae:
                    89:c5
                Exponent: 65537 (0x10001)
        X509v3 extensions:
            X509v3 Subject Alternative Name:
                DNS:node1.ecs.example.com, DNS:node2.ecs.example.com, DNS:node3.ecs.example.com, IP Address:192.0.2.1, IP Address:192.0.2.2, IP Address:192.0.2.3, IP Address:192.0.2.4
            X509v3 Basic Constraints: critical
                CA:FALSE
            X509v3 Key Usage: critical
                Digital Signature, Non Repudiation, Key Encipherment
            X509v3 Extended Key Usage: critical
                TLS Web Server Authentication
            X509v3 Authority Key Identifier:
                0.
    Signature Algorithm: sha256WithRSAEncryption
         33:85:7e:3b:fd:fd:3a:35:97:17:11:2d:4d:e1:7e:03:35:82:
         8a:47:30:ed:b2:f9:1b:b4:22:a2:60:00:b5:9c:aa:6c:0d:e7:
         ea:c7:0a:e6:05:24:7d:bd:50:ab:23:9b:16:6a:e7:be:e9:21:
         26:61:0e:e5:e1:62:7e:d8:01:3a:3e:19:14:89:c2:ef:62:a0:
         17:5c:80:2b:24:6b:96:73:fa:b0:8f:4d:09:0e:69:4f:72:f0:
         4d:b1:13:8d:90:4e:18:4b:82:be:fd:48:b0:c2:9d:9c:43:d9:
         d9:73:e6:15:88:79:1f:3e:13:ec:c9:6f:5f:2a:08:7c:a7:5d:
         b4:e1:50:0f:3c:49:e3:e4:9f:8f:dd:e0:b5:b5:2d:d8:2d:29:
         94:2d:4b:66:20:36:f0:ae:3a:ae:a4:c5:91:3c:f4:2a:d6:f5:
         24:ec:7b:3a:96:d6:75:91:f9:b3:1c:8a:93:87:1b:d7:f2:f7:
         72:4d:0c:02:b9:2e:ab:f6:76:ca:c5:74:39:e0:a0:54:2b:85:
         4d:dd:e6:c7:fc:d0:e7:bc:3e:9e:98:19:e5:ed:ad:5f:4b:ea:
         20:17:c5:23:eb:09:ad:8e:13:57:75:78:f9:68:bb:18:34:fc:
         3a:26:94:90:5e:ed:a6:09:bb:14:5c:bd:2e:d3:5b:c4:43:08:
         66:95:e7:ee



DONE


Vælg fra listen nedenfor, hvilken type certifikat du vil oprette:

Oprettelse af en anmodning om certifikatsignering

Brug:

ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_csr [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create certificate signing request for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create certificate signing request for management
                        interface (WEB UI)

Oprettelse af en CSR til datagrænsefladen:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_csr -d
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 192.0.2.1..PASS
Validating IPv4Address: 192.0.2.2..PASS
Validating IPv4Address: 192.0.2.3..PASS
Validating IPv4Address: 192.0.2.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data_private.key
----------------------------------------------------------------------
Certificate Signing Request
----------------------------------------------------------------------

Creating Certificate Signing Request..DONE
Wrote certificate signing request to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data.csr

Oprettelse af en CSR til administrationsgrænsefladen:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_csr -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 198.51.100.1..PASS
Validating IPv4Address: 198.51.100.2..PASS
Validating IPv4Address: 198.51.100.3..PASS
Validating IPv4Address: 198.51.100.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management_private.key
----------------------------------------------------------------------
Certificate Signing Request
----------------------------------------------------------------------

Creating Certificate Signing Request..DONE
Wrote certificate signing request to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management.csr

Oprettelse af et selvsigneret certifikat

Brug:

ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_ssc [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create self-signed certificate for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create self-signed certificate for management
                        interface (WEB UI)

Oprettelse af et selvsigneret certifikat for datagrænsefladen:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_ssc -d
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 192.0.2.1..PASS
Validating IPv4Address: 192.0.2.2..PASS
Validating IPv4Address: 192.0.2.3..PASS
Validating IPv4Address: 192.0.2.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data_private.key
----------------------------------------------------------------------
Self-signed certificate
----------------------------------------------------------------------

Creating self-signed certificate..DONE
Wrote Certificate to: /home/admin/ecs_certificate_tool-1.0/FNM00181300310-data.crt
admin@provo-ex3000:~/ecs_certificate_tool-1.0>

Oprettelse af et selvsigneret certifikat for administrationsgrænsefladen:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py create_ssc -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Validating REST API Credentials
----------------------------------------------------------------------

Authenticating using configured credentials..PASS


----------------------------------------------------------------------
Validating GENERAL configuration
----------------------------------------------------------------------

Validating COMMON_NAME = *.ecs.example.com..PASS
Validating COUNTRY_NAME = US..PASS
Validating LOCALITY_NAME = Salt Lake City..PASS
Validating STATE_OR_PROVINCE_NAME = Utah..PASS
Validating STREET_ADDRESS = 123 Example Street..PASS
Validating ORGANIZATION_NAME = Example Inc...PASS
Validating EMAIL_ADDRESS = example@example.com..PASS
----------------------------------------------------------------------
Validating DNS_NAMES configuration
----------------------------------------------------------------------

Validating DNSName: node1.ecs.example.com..PASS
Validating DNSName: node2.ecs.example.com..PASS
Validating DNSName: node3.ecs.example.com..PASS

----------------------------------------------------------------------
Validating IP_ADDRESSES configuration
----------------------------------------------------------------------

Validating IPv4Address: 198.51.100.1..PASS
Validating IPv4Address: 198.51.100.2..PASS
Validating IPv4Address: 198.51.100.3..PASS
Validating IPv4Address: 198.51.100.4..PASS

Validating SELF_SIGNED..PASS

All configurations items validated successfully!

Creating RSA private key..DONE
Wrote private key to /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management_private.key
----------------------------------------------------------------------
Self-signed certificate
----------------------------------------------------------------------

Creating self-signed certificate..DONE
Wrote Certificate to: /home/admin/ecs_certificate_tool-1.0/FNM00181300310-management.crt

Overfører dit certifikat

Hvis du bruger et selvsigneret certifikat, som dette værktøj genererede, findes den private nøgle og certifikatet allerede i din aktuelle mappe.

Hvis du har et certifikat, der er signeret af et nøglecenter, skal du overføre det til ECS og placere det i certifikatværktøjsmappen.
 

Bemærk: Sørg for at overføre hele certifikatkæden (rod/mellemplacering), hvis det er nødvendigt for dit miljø. Se #ECS: Data- og administrations-SSL-certifikatværktøj , hvis det er nødvendigt.


Datacertifikat

Kommando:

$ python ecs_certificate_tool.py upload_certificate -c <path to certificate> -p <path to private key> --data

Eksempel:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ecs_certificate_tool.py upload_certificate -c ./FNM00181300310-data.crt -p FNM00181300310-data_private.key --data
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Upload Certificate
----------------------------------------------------------------------

Authenticating using configured credentials..PASS

Reading certificate from: ./FNM00181300310-data.crt..DONE
Reading private key from: FNM00181300310-data_private.key..DONE
Verifying the private key matches the certificate..DONE
Uploading the certificate to ECS..DONE

admin@provo-ex3000:~/ecs_certificate_tool-1.0>

Når du har uploadet certifikatet, har du to muligheder:

  1. Vent 2 timer til dataheadsvc for at overføre det nye certifikat på tværs af klyngen.
  2. Genstart manuelt dataheadsvc på den node, du kørte værktøjet fra, men vær opmærksom på, at dette kan have en kort indvirkning.

Kommando til genstart dataheadsvc:

# sudo kill -9 `pidof dataheadsvc`


Administrationscertifikat

Kommando:

$ python ./ecs_certificate_tool.py upload_certificate -c <path to certificate> -p <path to private key> --management

Eksempel:

admin@provo-ex3000:~/ecs_certificate_tool-1.0> python ./ecs_certificate_tool.py upload_certificate -c ./FNM00181300310-management.crt -p FNM00181300310-management_private.key -m
ecs_certificate_tool v1.0
log_file: /home/admin/ecs_certificate_tool-1.0/certificate_tool.log

----------------------------------------------------------------------
Upload Certificate
----------------------------------------------------------------------

Authenticating using configured credentials..PASS

Reading certificate from: ./FNM00181300310-management.crt..DONE
Reading private key from: FNM00181300310-management_private.key..DONE
Verifying the private key matches the certificate..DONE
Uploading the certificate to ECS..DONE


Når du har overført det nye administrationscertifikat, skal du udføre rullende genstarter af objcontrolsvc/nginx på tværs af klyngen. Dette kan have en minimal indvirkning på adgang til brugergrænsefladen.

  1. Generer en klyngedækkende MACHINES-fil :
$ sudo getclusterinfo -a /root/MACHINES.VDC && sudo viprscp -f /root/MACHINES.VDC /root/MACHINES.VDC /root/;sudo viprscp -f /root/MACHINES.VDC /root/MACHINES.VDC /home/admin/;sudo viprexec -i -f /home/admin/MACHINES.VDC "pingall; md5sum /root/MACHINES.VDC /home/admin/MACHINES.VDC"
  1. Genstart objcontrolsvc På tværs af klyngen:
$ viprexec -f ~/MACHINES.VDC -i 'pidof objcontrolsvc; kill -9 `pidof objcontrolsvc`; sleep 60; pidof objcontrolsvc'
  1. Genstart nginx På tværs af klyngen:
$ viprexec -f ~/MACHINES.VDC -i -c "/etc/init.d/nginx restart;sleep 60;/etc/init.d/nginx status"

Eksempel på certifikater

Fuld kæde (root/intermediate/ecs)

-----BEGIN CERTIFICATE-----
<content of your ECS certificate>
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
<content of intermediate certificate>
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
<content of root certificate>
-----END CERTIFICATE-----

Flere oplysninger

Produktbemærkninger: 

12/12/2020     1.0 - Fix outputting when password not configured in config.ini during view_certs operation

02/12/2021     1.1 - Support different hostnames for data/management interfaces #3
                   - Rewrote view_certs so it works if no certs have been uploaded yet. #2
                   - backup original certifiate before uploading new one. #1

04/07/2021     1.2 - nuke certs #10
                   - fix urllib3 warnings
                   - fix logging
                   - output additional info when viewing certs #9
07/06/2021     1.3 - Support 1024/2048/4096 private key sizes #14

09/24/2021     1.4 - #18 - Fix bug in get_issuer
                   - #19 - Remove sudo requirement and force admin user
                   - #23 - Handle Credentials with ?{}|&~![()^"

10/08/2021     1.5 - #25 - admin userid 1001

               1.6 - Set log file permissions to 0755 and chown os.geteuid/os.getegid
                   - fix userid check
05/11/2025    1.7 - added ObjectScale compatible tool , changed the minimum key length for ObjectScale and added Readme

08/12/2025    1.8 - added support for ObjectScale 4.2 - python 3.12 compatible

11/25/2025    1.9 - added support for geo certificate generation with VDC ID in SAN

 

Handlinger:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py -h
ecs_certificate_tool v0.9
log_file: /home/admin/ecs_certificate_tool-0.9/certificate_tool.log
 
usage: ecs_certificate_tool.py [-h]
                               {view_certs,generate_san,create_csr,create_ssc,upload_certificate}
                               ...
 
positional arguments:
  {view_certs,generate_san,create_csr,create_ssc,upload_certificate}
                        sub-command help
    view_certs          Shows the current certificates on the data and
                        management interfaces
    generate_san        Generates the subject alternative name IP addresses
                        and domain names from fabric and adds them to the ini
                        config file
    create_csr          Create certificate signing request
    create_ssc          Create self-signed certificate
    upload_certificate  Upload certificate to the data interface
 
optional arguments:
  -h, --help            show this help message and exit

Opret anmodning om certifikatsignering:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py create_csr -h
ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_csr [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create certificate signing request for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create certificate signing request for management
                        interface (WEB UI)

Opret et selvsigneret certifikat:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py create_ssc -h
ecs_certificate_tool v1.3
usage: ecs_certificate_tool.py create_ssc [-h] [-k {1024,2048,4096}] (-d | -m)

optional arguments:
  -h, --help            show this help message and exit
  -k {1024,2048,4096}, --key_size {1024,2048,4096}
                        Private key size for RSA private key generation
                        (default=2048)
  -d, --data            Create self-signed certificate for data interface
                        (ports 9020, 9021, 3218) (S3, CAS, NFS, etc)
  -m, --management      Create self-signed certificate for management
                        interface (WEB UI)

Overfør certifikat:

admin@provo-ex3000:~/ecs_certificate_tool-0.9> sudo python ./ecs_certificate_tool.py upload_certificate -h
ecs_certificate_tool v0.9
log_file: /home/admin/ecs_certificate_tool-0.9/certificate_tool.log
 
usage: ecs_certificate_tool.py upload_certificate [-h] -c CERTIFICATE -p
                                                  PRIVATE_KEY (-d | -m)
 
optional arguments:
  -h, --help            show this help message and exit
  -c CERTIFICATE, --certificate CERTIFICATE
                        Filepath to the data certificate
  -p PRIVATE_KEY, --private_key PRIVATE_KEY
                        Filepath to private key with no password
  -d, --data            Upload certificate to the data interface
  -m, --management      Upload certificate to the management interface

Certifikater skal formateres på følgende måde:

——BEGIN CERTIFICATE——
host certificate
——END CERTIFICATE——
——BEGIN CERTIFICATE——
intermediate certificate
——END CERTIFICATE——
——BEGIN CERTIFICATE——
root certificate
——END CERTIFICATE——

Berørte produkter

ECS, ECS Appliance, ECS Appliance Gen 1, ECS Appliance Gen 2, ECS Appliance Gen 3, ECS Appliance Hardware Gen1 U-Series, ECS Appliance Hardware Gen1 C-Series, ECS Appliance Hardware Gen2 C-Series, ECS Appliance Hardware Gen2 D-Series , ECS Appliance Hardware Gen2 U-Series ...

Produkter

ECS Appliance Hardware Gen3 EX300, ECS Appliance Hardware Gen3 EX3000, ECS Appliance Hardware Gen3 EX500, ECS Appliance Hardware Gen3 EXF900, ECS Appliance Hardware Series, ECS Appliance Software with Encryption , ECS Appliance Software without Encryption ...
Artikelegenskaber
Artikelnummer: 000181006
Artikeltype: How To
Senest ændret: 02 maj 2026
Version:  24
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.