How to Save and Restore Library configuration and Restore Factory Defaults on a TL2000 or TL4000

Oversigt: Here you can find the description how to Save and/or Restore the Library configuration and the Restore Factory Defaults on a TL2000 or TL4000.

Denne artikel gælder for Denne artikel gælder ikke for Denne artikel er ikke knyttet til et bestemt produkt. Det er ikke alle produktversioner, der er identificeret i denne artikel.
Udforsk andre ressourcer

Instruktioner

To
Save the Library Configuration.
Go to Save/Restore under the Configure Library section. 
Click Save at the Save Configuration to File.
SaveLibconfig1.png

The Download is provided using the Browser.
SaveLibconfig2.png

The *.dbb File is located in your Downloads folder from your management system. 
SaveLibconfig3.png


To
Restore the Library Configuration.
Go to Save/Restore under the Configure Library section. 
Click Browse… at the Restore Configuration from File.
RestLibconfig1.png

Select the configuration file (*.dbb) from your management system.
RestLibconfig2.png

Click Restore at the Restore Configuration from File.
RestLibconfig3.png

Be aware: If you load a configuration from another Library, the ServiceTag is overwritten too, and it should be corrected afterwards. A description how to do that you can find here: How to change the ServiceTag of a PowerVault TL2000 or TL4000.


To
Restore Factory Defaults
Go to Save/Restore under the Configure Library section. 
Click Restore at the Restore Factory Defaults.
LibconfigDefault1.png

Confirm the prompt on the screen with OK.
LibconfigDefault2.png

Berørte produkter

PowerVault TL2000, PowerVault TL4000
Artikelegenskaber
Artikelnummer: 000205962
Artikeltype: How To
Senest ændret: 27 mar. 2023
Version:  3
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.