Dell Unity: LDAP server connection failed

Summary: Dell Unity: LDAP server connection failed

Αυτό το άρθρο ισχύει για Αυτό το άρθρο δεν ισχύει για Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν. Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Δείτε άλλους πόρους

Symptoms

A customer is working on configure LDAP on Array and has an issue that the LDAP server connection failed.

Could not connect to the LDAP server. Please recheck your LDAP configuration under Directory Services is reported on the page "Configure LDAP Server Credentials."

LDAP Domain = jstone.mystore.com
Distinguished Name=CN=unity-service, CN=Users, DC=jstone, DC=mystore, DC=com
Password=matched to domain account password set for unity-service in Active Directory
Port=389

Click <Apply> then Verify Credentials. >> Connection Failed message appears.

 

Cause

NTP was not configured.

 

Resolution

After the NTP has been set, the LDAP authentication worked successfully.

 

Additional Information

  1. Check network connection between Unity and LDAP server. You can see CLI guide /net/util/ping or /net/util/traceroute to check it.

  2. If the connection is ok, you may need to check if the Bind DN is correct. See CLI guide /net/nas/ldap

Check and ensure that your bind DN path matches with your LDAP server settings.

 

Επηρεαζόμενα προϊόντα

Dell EMC Unity Family

Προϊόντα

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family , Dell EMC Unity Hybrid ...
Ιδιότητες άρθρου
Article Number: 000052055
Article Type: Solution
Τελευταία τροποποίηση: 20 Οκτ 2025
Version:  7
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.