PowerPath: Hostitel Windows se nespustí s chybou "EmcpGpx.sys at 0xc0000098 po upgradu softwaru PowerPath 5.5 na 6.0"
Summary: Po upgradu na verzi PowerPath 6.0 nelze spustit hostitele.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Po upgradu na verzi PowerPath 6.0 nelze spustit hostitele.
Nefunguje ani nouzový režim.
Cause
Procmon, Process Explorer a handle.exe jsou nezbytné k tomu, aby bylo možné přesně říci, co drží EmcpMpx.sys a co EmcpBase.sys.
=== HOST\XXXXXXXX_SETUPAPI.DEV.LOG ===
sig: Using catalog 'C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\oem34.CAT'.
cpy: Source File 'C:\Windows\system32\DRIVERS\SET9996.tmp' is NOT signed NT5 Crypto.
cpy: DrpGetFileProt Status=0 dwClass=5
cpy: MoveFile: 'C:\Windows\system32\DRIVERS\SET9996.tmp'
cpy: to: 'C:\Windows\system32\DRIVERS\EmcpMpx.sys'
!!! cpy: MoveFile: FAILED!
!!! cpy: Error 5: Access is denied.
cpy: DrpSetRegFileProt 'C:\Windows\system32\DRIVERS\EmcpMpx.sys' Status=0 Class=OEM Legacy
! cpy: Targetfile 'C:\Windows\system32\DRIVERS\EmcpMpx.sys' marked to be moved from 'C:\Windows\system32\DRIVERS\SET9996.tmp' on next reboot.
sig: Using catalog 'C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\oem32.CAT'.
cpy: Source File 'C:\Windows\system32\DRIVERS\SET8165.tmp' is NOT signed NT5 Crypto.
cpy: DrpGetFileProt Status=0 dwClass=5
cpy: MoveFile: 'C:\Windows\system32\DRIVERS\SET8165.tmp'
cpy: to: 'C:\Windows\system32\DRIVERS\EmcpBase.sys'
!!! cpy: MoveFile: FAILED!
!!! cpy: Error 5: Access is denied.
cpy: DrpSetRegFileProt 'C:\Windows\system32\DRIVERS\EmcpBase.sys' Status=0 Class=OEM Legacy
! cpy: Targetfile 'C:\Windows\system32\DRIVERS\EmcpBase.sys' marked to be moved from 'C:\Windows\system32\DRIVERS\SET8165.tmp' on next reboot.Resolution
Nouzový režim nefunguje, ale funkce Poslední známá funkční konfigurace může fungovat. V takovém případě spusťte LKGC a poté hostitele znovu restartujte. Problém zmizí.
Additional Information
Důvodem, proč se operační systém nemohl spustit, byla chyba aktualizace EmcpBase a EmcpMpx. Při spuštění operační systém stále používá starší verze EmcpBase a EmcpMpx. Když použije tyto systémové soubory a když dosáhne EmcpGpx, protože se jedná o jinou verzi (novější), selže v domnění, že je poškozená nebo chybí, protože hledá starší verzi.
Affected Products
PowerPath for WindowsProducts
PowerPath for WindowsArticle Properties
Article Number: 000171330
Article Type: Solution
Last Modified: 19 Feb 2024
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.