Dell Unity: Cannot Upload OE Upgrade File to System, Error Code-0x6000cc4, Incorrect Format
Summary: This article describes one of the reasons that the upgrade image might show an incorrect format message. (User Correctable)
Symptoms
Error Message:
File uploaded is incorrect format. Please obtain a new copy of the upgrade image and try again. (Error Code:0x6000cc4)
Cause
This error can occur when an unsupported upgrade is attempted. Some upgrades require upgrading to a specific version and then upgrading again to the final version.
The error message is shown as the encryption keys are not available to decrypt the upgrade package:
File uploaded is incorrect format. Please obtain a new copy of the upgrade image and try again. (Error Code:0x6000cc4)
Resolution
Some Unity OE upgrades cannot be done directly and require intermediate upgrade steps.
The below table describes the valid upgrade paths. Unity systems running versions earlier than 5.1 must upgrade to 5.4.1 before upgrading to version 5.5. This is due to changes in support for TLS, KMIP, and encryption keys between pre-5.1 versions and 5.5.
Supported Upgrade Paths:
| To 5.4.1.x | To 5.5.0.x | To 5.5.1.x | |
|---|---|---|---|
| From 4.x | 4.x → 5.4.1.x | 4.x → 5.4.1.x → 5.5.0.x | 4.x → 5.4.1.x → 5.5.1.x |
| From 5.0.x | 5.0.x → 5.4.1.x | 5.0.x → 5.4.1.x → 5.5.0.x | 5.0.x → 5.4.1.x → 5.5.1.x |
| From 5.1.x | 5.1.x → 5.4.1.x | 5.1.x → 5.5.0.x | 5.1.x → 5.5.0.x → 5.5.1.x |
| From 5.2.x | 5.2.x → 5.4.1.x | 5.2.x → 5.5.0.x | 5.2.x → 5.5.0.x → 5.5.1.x |
| From 5.3.x | 5.3.x → 5.4.1.x | 5.3.x → 5.5.0.x | 5.3.x → 5.5.0.x → 5.5.1.x |
| From 5.4.0.x | 5.4.0.x → 5.4.1.x | 5.4.0.x → 5.5.0.x | 5.4.0.x → 5.5.0.x → 5.5.1.x |
| From 5.4.1.x | 5.4.1.x → 5.4.1.x | 5.4.1.x → 5.5.0.x | 5.4.1.x → 5.5.1.x |
| From 5.5.0.x | unsupported | 5.5.0.x → 5.5.0.x | 5.5.0.x → 5.5.1.x |
If following an unsupported upgrade path, remove the uploaded image, obtain the correct image, and reattempt the upgrade.
Additional Information
Reference articles:
- Dell Unity OE Matrix
- Dell Unity: Upgrade File uploaded is incorrect format (Error Code: 0x6000cc4) (User Correctable)
Other reasons for the error message:
(Login as a registered Dell Support user may be required to view these articles.)