ViPR Controller: O failover do VMware Site Recovery Manager (SRM) falha com o erro: "Falha ao recuperar datastore"

Summary: O failover do VMware Site Recovery Manager (SRM) falha com o erro "Failed to recover datastore"

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Implementação de failover do VMware SRM

O usuário não consegue executar um failover do VMware Site Recovery Manager (SRM) usando o RecoverPoint (RP).
O VMware SRM enviou o comando de failover diretamente ao RP.

Nota: Nesse cenário, o ViPR Controller não fazia parte do procedimento de failover.
Não há eventos relacionados nos logs do ViPR Controller.

VMware Site Recovery Manager (SRM):

4. Create writable storage snapshot    Error - Some virtual machines in the protection group '<protection group>' could not be recovered Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan. Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan.    2019-02-13 22:05:44 (UTC 0)    2019-02-13 22:06:23 (UTC 0)    00:00:39

4.1. Protection Group <protection group>    Error - Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan. Failed to recover datastore '<datastore name>'. VMFS volume residing on recovered devices '"<WWN of volume>"' cannot be found. Recovered device '<WWN of volume>' not found after HBA rescan. Some virtual machines in the protection group 'protection group' could not be recovered

 

Cause

A causa do problema é que as LUNs de destino não foram exportadas para o cluster de destino.

 

Resolution

Solução temporária:

  • Para facilitar um failover do SRM, certifique-se de que as LUNs de destino devem ser exportadas para o cluster de destino com antecedência.
  • Isso permite que os volumes sejam vistos pelos hosts do ESXi durante a nova varredura.
  • Isso pode ser feito usando o item de catálogo "Export Volume to a Host" no VIPR Controller.

 

Products

RecoverPoint
Article Properties
Article Number: 000057470
Article Type: Solution
Last Modified: 26 Nov 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.