Dell Unity: Ein Grund, warum der Replikationsstatus unbekannt ist (vom Nutzer korrigierbar)
Summary: Dieser Wissensdatenbank-Artikel beschreibt eine der Ursachen für den Status "Unbekannt" der Replikation.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Der Replikationsstatus wird als Unbekannt angezeigt.
# uemcli -no /prot/rep/session -name XXXXXXXXXX show 1: ID = 1717986919XX_VIRT1615KVBXXX_0000_1717986919XX_VIRT2213XBSXXX_0000 Name = XXXXXXXXXX Session type = file Synchronization type = auto RPO = 1h 00m Sync State = idle Health state = Unknown (0) Operational status = Unknown (0x0) Time of last sync = 2023-MM-DD 02:14:55 Sync status = Element pairs = N/A
Cause
Dieses Ereignis tritt auf, wenn die folgenden beiden Bedingungen erfüllt sind.
(1) Benutzer-Snapshot ist auf Replikation eingestellt.
(2) Der Benutzer-Snapshot hat auf der Zielseite sein Maximum erreicht und es kann kein neuer Snapshot erstellt werden.
(1) Benutzer-Snapshot ist auf Replikation eingestellt.
(2) Der Benutzer-Snapshot hat auf der Zielseite sein Maximum erreicht und es kann kein neuer Snapshot erstellt werden.
Resolution
Wenn das Problem auf die Anzahl der Snapshots zurückzuführen ist, führen Sie die folgenden Schritte aus, um den Replikationsstatus zu verbessern.
(1) Löschen Sie unnötige Snapshots auf der Zielseite.
(2) Halten Sie die Replikation an und setzen Sie sie fort.
(1) Löschen Sie unnötige Snapshots auf der Zielseite.
(2) Halten Sie die Replikation an und setzen Sie sie fort.
Additional Information
Die maximale Anzahl der Snapshots, die erstellt werden können, wird in der Supportmatrix beschrieben.
https://elabnavigator.dell.com/vault/pdf/EMC_Unity_ESSM.pdf Beispiel:
Die maximale Anzahl von Snapshots und die aktuelle Anzahl der Snapshots für Unity können mit dem folgenden Befehl geprüft werden.
svc_storagecheck --list |grep "CheckpointSnaps"
Beispielausgabe:
https://elabnavigator.dell.com/vault/pdf/EMC_Unity_ESSM.pdf Beispiel:
Die maximale Anzahl von Snapshots und die aktuelle Anzahl der Snapshots für Unity können mit dem folgenden Befehl geprüft werden.
svc_storagecheck --list |grep "CheckpointSnaps"
Beispielausgabe:
svc_storagecheck --list |grep "CheckpointSnaps" MaxCheckpointSnaps : 500 CountCheckpointSnaps : 500
Affected Products
Dell EMC Unity, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600Products
Dell Unity 450F DC, Dell Unity 300, Dell Unity 300 DC, Dell Unity 350F DC, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell Unity 400 DC, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 600F, Dell EMC Unity 650F
, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell Unity Operating Environment (OE), Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
Article Properties
Article Number: 000216468
Article Type: Solution
Last Modified: 26 Oct 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.