Dell Unity: Eén reden om de replicatiestatus onbekend te maken (op te lossen door gebruiker)
Summary: Dit KB-artikel beschrijft een van de oorzaken van de onbekende status van replicatie.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
De replicatiestatus wordt weergegeven als Onbekend.
# uemcli -no /prot/rep/session -name XXXXXXXXXX show 1: ID = 1717986919XX_VIRT1615KVBXXX_0000_1717986919XX_VIRT2213XBSXXX_0000 Name = XXXXXXXXXX Session type = file Synchronization type = auto RPO = 1h 00m Sync State = idle Health state = Unknown (0) Operational status = Unknown (0x0) Time of last sync = 2023-MM-DD 02:14:55 Sync status = Element pairs = N/A
Cause
Deze gebeurtenis treedt op wanneer aan de volgende twee voorwaarden wordt voldaan.
(1) User Snapshot is ingesteld op Replicatie.
(2) User Snapshot heeft het maximum aan de doelzijde bereikt en er kan geen nieuwe snapshot worden gemaakt.
(1) User Snapshot is ingesteld op Replicatie.
(2) User Snapshot heeft het maximum aan de doelzijde bereikt en er kan geen nieuwe snapshot worden gemaakt.
Resolution
Als het probleem te wijten is aan het aantal snapshots, volgt u de onderstaande stappen om de replicatiestatus te verbeteren.
(1) Verwijder onnodige snapshots aan de doelzijde.
(2) Pauzeer en hervat de replicatie.
(1) Verwijder onnodige snapshots aan de doelzijde.
(2) Pauzeer en hervat de replicatie.
Additional Information
- Het maximale aantal snapshots dat kan worden gemaakt, wordt beschreven in de supportmatrix.
https://elabnavigator.dell.com/vault/pdf/EMC_Unity_ESSM.pdf voorbeeld:
- Het maximale aantal snapshots en het huidige aantal snapshots voor Unity kan worden gecontroleerd met de volgende opdracht.
svc_storagecheck --list |grep "CheckpointSnaps"
Voorbeelduitvoer:
https://elabnavigator.dell.com/vault/pdf/EMC_Unity_ESSM.pdf voorbeeld:
- Het maximale aantal snapshots en het huidige aantal snapshots voor Unity kan worden gecontroleerd met de volgende opdracht.
svc_storagecheck --list |grep "CheckpointSnaps"
Voorbeelduitvoer:
svc_storagecheck --list |grep "CheckpointSnaps" MaxCheckpointSnaps : 500 CountCheckpointSnaps : 500
Affected Products
Dell EMC Unity, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600Products
Dell Unity 450F DC, Dell Unity 300, Dell Unity 300 DC, Dell Unity 350F DC, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell Unity 400 DC, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 600F, Dell EMC Unity 650F
, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell Unity Operating Environment (OE), Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
Article Properties
Article Number: 000216468
Article Type: Solution
Last Modified: 26 Oct 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.