NetWorker: nmc_config mislykkes på en Linux-server med "Kan ikke kontakte godkendelsesserver på vært Networker_server_hostname og port 9090"

Summary: Denne artikel omhandler advarsel under konfiguration af NMC på en NetWorker-server som "ADVARSEL: Kan ikke kontakte godkendelsesserver på værten Networker_server_hostname og port 9090", når Linux-serveren er konfigureret med proxyværter. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

  • NetWorker Management Console-serveren (NMC) er installeret på et RHEL-baseret Linux-operativsystem.
  • Når du kører NMC-konfigurationsscriptet (/opt/lgtonmc/bin/nmc_config), kan det ikke kontakte godkendelsesserveren på Authc-port 9090.
[root@networker_server_hostname /]# /opt/lgtonmc/bin/nmc_config
The embedded web server inside the NMC server must run as a non-root user.
Dell recommends that you specify a user that has limited privileges and file access permissions. Default user name used is 'nsrnmc'.
Do you want to create new(cn) certificate or use existing(ue) certificate [cn]?
Create new certificate for https configuration.
Specify the directory to use for the LGTOnmc database[/nsr/nmc/nmcdb]:
Do you want to migrate the NMC server data from a previous LGTOnmc 8.x.x release [n]?
Specify the host name of the Networker Authentication Service host [Networker_server_hostname]:
WARNING: Unable to contact authentication server on host Networker_Server_hostname and port 9090
Do you want to specify a different authentication server host or port [y]?

Cause

Proxyen blev aktiveret på serveren.
 
  1. Nedenstående fejl er fra /opt/lgtonmc/logs/install.log
129356:gstauthcfg: Unable to get supported versions from authentication server: Received HTTP code 403 from proxy after CONNECT
Server Message : Make sure that server is running
  1. Følgende kommando viser de aktive proxyer:
[root@Networker_server_hostname /]# env |grep -i proxy
http_proxy=http://:8080
https_proxy=http://:8080

Resolution

BEMÆRK: Nedenstående procedure skal udføres af Linux-systemadministratoren.
  1. Notér de proxyer, der er konfigureret på systemet:
[root@Networker_server_hostname /]# env | grep -i proxy
http_proxy=http://:8080
https_proxy=http://:8080
  1. Hvis proxyposter er angivet i /etc/profile, skal du kommentere dem og logge af.
  2. Log på NetWorker-serveren igen, og kør NMC-konfigurationsscriptet igen: sudo /opt/lgtonmc/bin/nmc_config

Affected Products

NetWorker

Products

NetWorker Family, NetWorker Series
Article Properties
Article Number: 000216702
Article Type: Solution
Last Modified: 29 Nov 2023
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.