ZDP MFE: RC errato per il comando QUERY. Nuovo messaggio introdotto da EIP0287W/E
Summary: RC errato per il comando QUERY
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Il comando QUERY TGT,STATUS,DEVICE restituisce RC=0 quando uno dei sistemi PowerMax in TGT è offline.
Il comando QUERY VDG restituisce RC=0 quando VDG contiene i dispositivi che sono stati eliminati dal sistema PowerMax.
zDP Definition Utility è stata aggiornata per impostare il codice di restituzione finale in base al MAX_RC e alla gravità del messaggio di avviso/errore.
Se un dispositivo non esiste su un sistema PowerMax, la voce del dispositivo nell'output QUERY verrà contrassegnata con "*".
Il comando QUERY VDG restituisce RC=0 quando VDG contiene i dispositivi che sono stati eliminati dal sistema PowerMax.
zDP Definition Utility è stata aggiornata per impostare il codice di restituzione finale in base al MAX_RC e alla gravità del messaggio di avviso/errore.
Se un dispositivo non esiste su un sistema PowerMax, la voce del dispositivo nell'output QUERY verrà contrassegnata con "*".
A new message will also be issued: EIP0287W/E VDG , SYMM , some devices were not found on the controller
Cause
Ciò è dovuto a un problema software.
Resolution
Correzione permanente:
- Per Mainframe Enablers 8.5, è stato sviluppato PTF SF85107 per risolvere il problema. È disponibile per il download dal supporto online Dell.
Additional Information
Nota di copertura PTF:
++PTF(SF85107) REWORK(2021333) . ++VER(Z038) FMID(SSCF850) PRE( SF85068 SF85084 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * PROBLEM FIXED: OPT 590911 585747 * USERS AFFECTED: zDP users * PROBLEM DESCRIPTION: Incorrect RC for the QUERY command * DESCRIPTION DETAIL: * * The QUERY TGT,STATUS,DEVICE command returns RC=0 when one * of the PowerMax systems in TGT is offline. * The QUERY VDG command returns RC=0 when the VDG contains * devices that have been deleted from the PowerMax system. * * PROBLEM RESOLUTION: * * zDP Definition Utility has been updated to set final return * code based on the MAX_RC and the warning/error message * severity. * If a device doesn't exist on a PowerMax system, the device * entry in the QUERY output will be marked with a '*'. * A new message will also be issued: * EIP0287W/E VDG , SYMM , some * devices were not found on the controller * * * MODULES: EIPINIT * EIPMTBL * * ------------------------------------------------------------ * SF85107 29 Nov 2021 12:03:35 * ------------------------------------------------------------ * OPT Summary * The following OPTs were addressed by this PTF: * * 585747 590911 * *-------------------------------------------------------------
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000196303
Article Type: Solution
Last Modified: 22 Jul 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.