MFE zDP: Onjuiste RC voor de QUERY-opdracht. Nieuw bericht EIP0287W/E geïntroduceerd
Summary: Onjuiste RC voor de QUERY-opdracht
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
De opdracht QUERY TGT, STATUS, DEVICE retourneert RC=0 wanneer een van de PowerMax systemen in TGT offline is.
De query VDG-opdracht retourneert RC=0 wanneer de VDG apparaten bevat die zijn verwijderd uit het PowerMax systeem.
zDP Definition Utility is bijgewerkt om de definitieve retourcode in te stellen op basis van de MAX_RC en de prioriteit van de waarschuwing/foutmelding.
Als een apparaat niet bestaat op een PowerMax systeem, wordt de vermelding van het apparaat in de QUERY-uitvoer gemarkeerd met een '*'.
De query VDG-opdracht retourneert RC=0 wanneer de VDG apparaten bevat die zijn verwijderd uit het PowerMax systeem.
zDP Definition Utility is bijgewerkt om de definitieve retourcode in te stellen op basis van de MAX_RC en de prioriteit van de waarschuwing/foutmelding.
Als een apparaat niet bestaat op een PowerMax systeem, wordt de vermelding van het apparaat in de QUERY-uitvoer gemarkeerd met een '*'.
A new message will also be issued: EIP0287W/E VDG , SYMM , some devices were not found on the controller
Cause
Dit is te wijten aan een softwareprobleem.
Resolution
Permanente oplossing:
- Voor Mainframe Enablers 8.5 is PTF SF85107 ontwikkeld om het probleem te verhelpen. Het is beschikbaar om te downloaden van Dell Online Support.
Additional Information
OPMERKING PTF-afdekplaat:
++PTF(SF85107) REWORK(2021333) . ++VER(Z038) FMID(SSCF850) PRE( SF85068 SF85084 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * PROBLEM FIXED: OPT 590911 585747 * USERS AFFECTED: zDP users * PROBLEM DESCRIPTION: Incorrect RC for the QUERY command * DESCRIPTION DETAIL: * * The QUERY TGT,STATUS,DEVICE command returns RC=0 when one * of the PowerMax systems in TGT is offline. * The QUERY VDG command returns RC=0 when the VDG contains * devices that have been deleted from the PowerMax system. * * PROBLEM RESOLUTION: * * zDP Definition Utility has been updated to set final return * code based on the MAX_RC and the warning/error message * severity. * If a device doesn't exist on a PowerMax system, the device * entry in the QUERY output will be marked with a '*'. * A new message will also be issued: * EIP0287W/E VDG , SYMM , some * devices were not found on the controller * * * MODULES: EIPINIT * EIPMTBL * * ------------------------------------------------------------ * SF85107 29 Nov 2021 12:03:35 * ------------------------------------------------------------ * OPT Summary * The following OPTs were addressed by this PTF: * * 585747 590911 * *-------------------------------------------------------------
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000196303
Article Type: Solution
Last Modified: 22 Jul 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.