MFE zDP：QUERYコマンドのRCが正しくありません。EIP0287W/Eが導入された新しいメッセージ

Summary: QUERYコマンドのRCが正しくない

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

TGT内のいずれかのPowerMaxシステムがオフラインの場合、QUERY TGT、STATUS、DEVICEコマンドはRC=0を返します。   
  
QUERY VDGコマンドは、VDGにPowerMaxシステムから削除されたデバイスが含まれている場合、RC=0を返します。    

zDP Definition Utilityがアップデートされ、MAX_RCと警告/エラー メッセージの重大度に基づいて最終的なリターン コードが設定されました。
                                               
PowerMaxシステムにデバイスが存在しない場合、QUERY出力のデバイス エントリーには「*」とマークされます。       
A new message will also be issued:                           
EIP0287W/E VDG , SYMM , some devices were not found on the controller 

Cause

これは、ソフトウェアの問題が原因です。

Resolution

恒久対策： 
  • Mainframe Enablers 8.5では、PTF SF85107が 問題を修正するために開発されました。Dellオンライン サポートからダウンロードできます。

Additional Information

PTFカバー メモ: 
  
++PTF(SF85107) REWORK(2021333) .                               
++VER(Z038) FMID(SSCF850)                                      
      PRE(                                                     
          SF85068 SF85084                                       
          )                                                    
   /*                                                          
*------------------------------------------------------------- 
* PROBLEM DESCRIPTION(S):                                       
* ------------------------------------------------------------ 
* PROBLEM FIXED: OPT 590911 585747                             
* USERS AFFECTED: zDP users                                    
* PROBLEM DESCRIPTION: Incorrect RC for the QUERY command      
* DESCRIPTION DETAIL:                                          
*                                                              
* The QUERY TGT,STATUS,DEVICE command returns RC=0 when one    
* of the PowerMax systems in TGT is offline.                    
* The QUERY VDG command returns RC=0 when the VDG contains     
* devices that have been deleted from the PowerMax system.     
*                                                              
* PROBLEM RESOLUTION:                                           
*                                                              
* zDP Definition Utility has been updated to set final return  
* code based on the MAX_RC and the warning/error message       
* severity.                                                     
* If a device doesn't exist on a PowerMax system, the device   
* entry in the QUERY output will be marked with a '*'.         
* A new message will also be issued:                           
* EIP0287W/E VDG , SYMM , some       
* devices were not found on the controller                     
*                                                               
*                                                              
* MODULES: EIPINIT                                             
*          EIPMTBL                                             
*                                                               
* ------------------------------------------------------------ 
* SF85107 29 Nov 2021 12:03:35                                 
* ------------------------------------------------------------ 
*  OPT Summary                                                  
*  The following OPTs were addressed by this PTF:              
*                                                              
*    585747  590911                                            
*                                                               
*------------------------------------------------------------- 

Affected Products

Mainframe Enablers
Article Properties
Article Number: 000196303
Article Type: Solution
Last Modified: 22 Jul 2023
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.