MFE zDP: QUERY komutu için yanlış RC. Yeni mesaj EIP0287W/E kullanıma sunulur
Summary: QUERY komutu için yanlış RC
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
TGT'deki PowerMax sistemlerinden biri çevrimdışı olduğunda QUERY TGT, STATUS, DEVICE komutu RC=0 döndürür.
VDG, PowerMax sisteminden silinen aygıtlar içerirken QUERY VDG komutu RC=0 döndürür.
zDP Definition Utility, MAX_RC ve uyarı/hata mesajı önem derecesine göre son dönüş kodunu ayarlamak için güncelleştirildi.
Bir PowerMax sistemindeki bir aygıt yoksa QUERY çıktıındaki aygıt girişi "*" ile işaretlenir.
VDG, PowerMax sisteminden silinen aygıtlar içerirken QUERY VDG komutu RC=0 döndürür.
zDP Definition Utility, MAX_RC ve uyarı/hata mesajı önem derecesine göre son dönüş kodunu ayarlamak için güncelleştirildi.
Bir PowerMax sistemindeki bir aygıt yoksa QUERY çıktıındaki aygıt girişi "*" ile işaretlenir.
A new message will also be issued: EIP0287W/E VDG , SYMM , some devices were not found on the controller
Cause
Bunun nedeni bir yazılım sorunudur.
Resolution
Kalıcı çözüm:
- Ana Bilgisayar Etkinleştirme 8.5 için PTF SF85107, sorunu düzeltmek üzere geliştirilmiştir. Dell Çevrimiçi Destek'den indirilebilir.
Additional Information
PTF kapağı notu:
++PTF(SF85107) REWORK(2021333) . ++VER(Z038) FMID(SSCF850) PRE( SF85068 SF85084 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * PROBLEM FIXED: OPT 590911 585747 * USERS AFFECTED: zDP users * PROBLEM DESCRIPTION: Incorrect RC for the QUERY command * DESCRIPTION DETAIL: * * The QUERY TGT,STATUS,DEVICE command returns RC=0 when one * of the PowerMax systems in TGT is offline. * The QUERY VDG command returns RC=0 when the VDG contains * devices that have been deleted from the PowerMax system. * * PROBLEM RESOLUTION: * * zDP Definition Utility has been updated to set final return * code based on the MAX_RC and the warning/error message * severity. * If a device doesn't exist on a PowerMax system, the device * entry in the QUERY output will be marked with a '*'. * A new message will also be issued: * EIP0287W/E VDG , SYMM , some * devices were not found on the controller * * * MODULES: EIPINIT * EIPMTBL * * ------------------------------------------------------------ * SF85107 29 Nov 2021 12:03:35 * ------------------------------------------------------------ * OPT Summary * The following OPTs were addressed by this PTF: * * 585747 590911 * *-------------------------------------------------------------
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000196303
Article Type: Solution
Last Modified: 22 Jul 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.