MFE zDP: RC incorreto para o comando QUERY. Nova mensagem EIP0287W/E introduzida
Summary: RC incorreto para o comando QUERY
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
O comando QUERY TGT,STATUS,DEVICE retorna RC=0 quando um dos sistemas PowerMax no TGT está off-line.
O comando QUERY VDG retorna RC=0 quando o VDG contém dispositivos que foram excluídos do sistema PowerMax.
O zDP Definition Utility foi atualizado para definir o código de devolução final com base no MAX_RC e na severidade da mensagem de aviso/erro.
Se um dispositivo não existir em um sistema PowerMax, a entrada do dispositivo na saída QUERY será marcada com um "*".
O comando QUERY VDG retorna RC=0 quando o VDG contém dispositivos que foram excluídos do sistema PowerMax.
O zDP Definition Utility foi atualizado para definir o código de devolução final com base no MAX_RC e na severidade da mensagem de aviso/erro.
Se um dispositivo não existir em um sistema PowerMax, a entrada do dispositivo na saída QUERY será marcada com um "*".
A new message will also be issued: EIP0287W/E VDG , SYMM , some devices were not found on the controller
Cause
Isso se deve a um problema de software.
Resolution
Correção permanente:
- Para o Mainframe Enablers 8.5, o PTF SF85107 foi desenvolvido para corrigir o problema. Ele está disponível para download no suporte on-line da Dell.
Additional Information
Nota da tampa do PTF:
++PTF(SF85107) REWORK(2021333) . ++VER(Z038) FMID(SSCF850) PRE( SF85068 SF85084 ) /* *------------------------------------------------------------- * PROBLEM DESCRIPTION(S): * ------------------------------------------------------------ * PROBLEM FIXED: OPT 590911 585747 * USERS AFFECTED: zDP users * PROBLEM DESCRIPTION: Incorrect RC for the QUERY command * DESCRIPTION DETAIL: * * The QUERY TGT,STATUS,DEVICE command returns RC=0 when one * of the PowerMax systems in TGT is offline. * The QUERY VDG command returns RC=0 when the VDG contains * devices that have been deleted from the PowerMax system. * * PROBLEM RESOLUTION: * * zDP Definition Utility has been updated to set final return * code based on the MAX_RC and the warning/error message * severity. * If a device doesn't exist on a PowerMax system, the device * entry in the QUERY output will be marked with a '*'. * A new message will also be issued: * EIP0287W/E VDG , SYMM , some * devices were not found on the controller * * * MODULES: EIPINIT * EIPMTBL * * ------------------------------------------------------------ * SF85107 29 Nov 2021 12:03:35 * ------------------------------------------------------------ * OPT Summary * The following OPTs were addressed by this PTF: * * 585747 590911 * *-------------------------------------------------------------
Affected Products
Mainframe EnablersArticle Properties
Article Number: 000196303
Article Type: Solution
Last Modified: 22 Jul 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.