Data Domain - Setting Log level to 3

Summary: Increasing the CIFS log level of the system will help capture additional information to help trouble-shoot the issue.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Setting CIFS Log Level to 3

SUMMARY

Increasing the CIFS log level of the system will help capture additional information to help trouble-shoot the issue.

APPLIES TO

  • All Datadomain systems (excluding DD200)

  • 4.1.5.0 and above
  • CIFS

INSTRUCTION

  1. Access the Restorer using telnet, SSH, or serial direct connect.

    At the command prompt, type: 
    cifs option set loglevel 3
  2. Upload logs to the support server. 
    support upload bundle
  3. Reset the log level. 
    cifs option reset loglevel
  4. If you have been working with a support engineer and have a case created, please inform the support engineer that you have uploaded logs.

Additional Information

 

    Affected Products

    Data Domain

    Products

    Data Domain
    Article Properties
    Article Number: 000014980
    Article Type: How To
    Last Modified: 04 Jul 2024
    Version:  3
    Find answers to your questions from other Dell users
    Support Services
    Check if your device is covered by Support Services.