Article Number: 000131588
해당 사항 없음
작동 방법
EMSStrings.xml이라는 XML 파일은 EMS 대화 상자를 맞춤 구성하는 데 사용됩니다. 맞춤 구성을 적용하려면 파일을 C:\Windows\System32에 저장해야 합니다. 맞춤 구성된 대화 상자가 있는 컴퓨터에서 프로비저닝되는 모든 디바이스에는 EMSStrings.xml 파일이 _Encryption_Data_Do_Not_Delete_ 파일에 추가되므로 맞춤 구성 항목이 디바이스와 함께 이동합니다.
맞춤 구성은 다음 순서로 적용됩니다.
XML 파일은 언제 디바이스에서 업데이트됩니까?
디바이스가 인증되고 소유자가 로그인할 때마다 XML 파일이 C:\Windows\System32에 있는 파일로 업데이트됩니다.
XML 파일이 업데이트되는 경우 변경 사항은 언제 적용됩니까?
C:\Windows\System32의 파일이 편집되면 다음에 디바이스를 삽입할 때 새 텍스트가 적용됩니다. 암호화된 디바이스에 여전히 오래된 XML 파일이 있는 경우 이 파일을 사용하지만, 결국 디바이스의 XML 파일이 업데이트됩니다.
EE Server 또는 VE Server가 관련되어 있습니까?
아니요. EE Server 또는 VE Server는 XML 파일을 제공하지 않습니다. 조직에서 사용할 수 있는 푸시 기술을 사용하여 XML 파일을 클라이언트 컴퓨터로 푸시할 수 있습니다.
XML 파일의 형식은 무엇입니까?
버전 요소
버전 요소는 클라이언트 버전을 정의합니다. 버전 요소는 로깅만 사용됩니다.
8.x.x 1.0
언어 집합은 특정 언어에 대한 대화 상자 맞춤 구성입니다.
languageId는 Windows에서 정의한 타겟 기본 언어를 정의합니다. 이 경우 0x00은 기본언어 집합을 정의합니다. 사용자의 현재 MUI 언어가 검색되면 이 언어가 사용됩니다. 그렇지 않으면 기본 언어(0x00)를 사용합니다.
다음 언어 ID를 사용할 수 있습니다.
LANG_NEUTRAL 0x00 LANG_ARMENIAN 0x2b LANG_BELARUSIAN 0x23 LANG_CHINESE 0x04 LANG_DIVEHI 0x65 LANG_FAEROESE 0x38 LANG_GALICIAN 0x56 LANG_GUJARATI 0x47 LANG_ICELANDIC 0x0f LANG_KANNADA 0x4b LANG_KOREAN 0x12 LANG_MACEDONIAN 0x2f LANG_MARATHI 0x4e LANG_ORIYA 0x48 LANG_ROMANIAN 0x18 LANG_SINDHI 0x59 LANG_SWAHILI 0x41 LANG_TATAR 0x44 LANG_UKRAINIAN 0x22 |
LANG_AFRIKAANS 0x36 LANG_ASSAMESE 0x4d LANG_BENGALI 0x45 LANG_CROATIAN 0x1a LANG_DUTCH 0x13 LANG_FARSI 0x29 LANG_GEORGIAN 0x37 LANG_HEBREW 0x0d LANG_INDONESIAN 0x21 LANG_KASHMIRI 0x60 LANG_KYRGYZ 0x40 LANG_MALAY 0x3e LANG_MONGOLIAN 0x50 LANG_POLISH 0x15 LANG_RUSSIAN 0x19 LANG_SLOVAK 0x1b LANG_SWEDISH 0x1d LANG_TELUGU 0x4a LANG_URDU 0x20 |
LANG_ALBANIAN 0x1c LANG_AZERI 0x2c LANG_BULGARIAN 0x02 LANG_CZECH 0x05 LANG_ENGLISH 0x09 LANG_FINNISH 0x0b LANG_GERMAN 0x07 LANG_HINDI 0x39 LANG_ITALIAN 0x10 LANG_KAZAK 0x3f LANG_LATVIAN 0x26 LANG_MALAYALAM 0x4c LANG_NEPALI 0x61 LANG_PORTUGUESE 0x16 LANG_SANSKRIT 0x4f LANG_SLOVENIAN 0x24 LANG_SYRIAC 0x5a LANG_THAI 0x1e LANG_UZBEK 0x43 |
LANG_ARABIC 0x01 LANG_BASQUE 0x2d LANG_CATALAN 0x03 LANG_DANISH 0x06 LANG_ESTONIAN 0x25 LANG_FRENCH 0x0c LANG_GREEK 0x08 LANG_HUNGARIAN 0x0e LANG_JAPANESE 0x11 LANG_KONKANI 0x57 LANG_LITHUANIAN 0x27 LANG_MANIPURI 0x58 LANG_NORWEGIAN 0x14 LANG_PUNJABI 0x46 LANG_SERBIAN 0x1a LANG_SPANISH 0x0a LANG_TAMIL 0x49 LANG_TURKISH 0x1f LANG_VIETNAMESE 0x2a |
dialog XML 요소는 대화 상자를 맞춤 구성하는 데 사용됩니다. 다음은 기본 대화 상자 맞춤 구성 항목의 예입니다.
Ask to Shield unprotected media.[EndState: ALL]
모든 대화 상자 맞춤 구성 요소에는 맞춤 구성 중인 대화 상자를 정의하는 id 속성이 필요합니다. 아래 스크린샷 표에는 대화 상자 ID가 정의되어 있습니다.
일부 대화 상자는 endState 속성을 지원합니다. 이 속성은 사용자가 프로세스를 계속하지 않을 경우 디바이스의 최종 상태에 따라 달라질 수 있는 특정 대화 상자에 대해 다른 맞춤 구성을 제공하는 데 사용할 수 있습니다. 예를 들어 A-1 대화 상자에는 각 종료 상태에 대해 하나씩 3개의 서로 다른 항목이 있을 수 있습니다.
blocked"> Ask to Shield unprotected media.[EndState: BLOCKED] Link to more info about encryption or being blocked... readonly"> Ask to Shield unprotected media.[EndState: READ-ONLY] fullaccess"> Ask to Shield unprotected media.[EndState: FULL ACCESS]
message 요소는 대화 상자의 기본 메시지를 맞춤 구성하는 데 사용됩니다.
link 요소는 A -? 대화 상자에서만 지원됩니다. 대화 상자에 URL 링크를 추가하는 데 사용할 수 있습니다. 다음과 같은 형식을 사용합니다.
Link to more info about encryption or the end state...
여기서 url 속성은 링크를 지정하고 내부 텍스트는 표시하기 위해 클릭할 수 있는 메시지를 지정합니다.
iForgot 요소는 C-1 및 C-2 대화 상자에서만 지원됩니다. I Forgot 버튼을 누를 경우 표시되는 메시지를 지정합니다.
fusWarning 요소는 C-1 및 C-2 대화 상자에서만 지원됩니다. 이 메시지는 여러 사용자가 워크스테이션에 로그인한 상태에서 사용자가 디바이스를 인증하려고 할 때 표시됩니다. 이 요소는 보안 위험이 있다는 것을 분명히 합니다.
cancelWarning 요소는 F-1 대화 상자에서만 지원됩니다. 사용자가 수동 인증을 취소할 경우 표시되는 메시지를 지정합니다.
대화 상자 ID | 스크린샷 | 설명 | 지원되는 맞춤 구성 | ||
---|---|---|---|---|---|
차단됨 | 읽기 전용 액세스 | 전체 액세스 | |||
A-1 | 그림 1: (영어로만 제공) 보호되지 않은 미디어 발견 |
그림 2: (영어로만 제공) 보호되지 않은 미디어 발견 |
그림 3: (영어로만 제공) 보호되지 않은 미디어 발견 |
보호되지 않는 미디어를 Shield로 보호하도록 요청합니다. 사용자가 No를 클릭하면 디바이스가 보호되지 않은 상태로 유지되며 Access To un-Shielded Media 정책에 따라 액세스가 달라집니다. | endState 메시지 |
A-2 | 그림 4: (영어로만 제공) 외부 미디어 디바이스 보호 업그레이드 |
그림 5: (영어로만 제공) 외부 미디어 디바이스 보호 업그레이드 |
그림 6: (영어로만 제공) 외부 미디어 디바이스 보호 업그레이드 |
5.3 이전 버전의 EMS에 의해 디바이스가 보호되는 경우 사용자가 EMS로 업그레이드할지 여부를 묻는 메시지가 표시됩니다. 이 메시지는 새 로밍 규칙에 따라 현재 사용자/시스템 조합으로 디바이스를 업그레이드할 수 있는 경우에만 표시됩니다. | endState 메시지 |
A-3 | 그림 7: (영어로만 제공) External Media Shield 복구 |
그림 8: (영어로만 제공) External Media Shield 복구 |
그림 9: (영어로만 제공) External Media Shield 복구 |
이 대화 상자는 디바이스의 키 자료를 복원해야 할 때 표시됩니다. 수동 인증 실패, 사용자 변조 또는 디바이스 손상으로 인해 삭제되었을 수 있습니다. 키 자료를 재설정해야 하는 정책의 변경도 이 메커니즘을 트리거합니다. | endState 메시지 링크 |
B-1 | 그림 10: (영어로만 제공) 새 비밀번호 입력 |
그림 11: (영어로만 제공) 새 비밀번호 입력 |
그림 12: (영어로만 제공) 새 비밀번호 입력 |
이 대화 상자는 디바이스가 Shield로 보호되거나 복구된 경우 표시됩니다. | endState 메시지 |
B-2 | 그림 13: (영어로만 제공) 새 비밀번호 입력 |
그림 14: (영어로만 제공) 새 비밀번호 입력 |
그림 15: (영어로만 제공) 새 비밀번호 입력 |
관리자가 설정한 제한 사항을 충족하지 않는 비밀번호를 사용자가 입력한 후에 표시됩니다. | endState 메시지 |
B-3 | 그림 16: (영어로만 제공) 비밀번호 재설정 |
그림 17: (영어로만 제공) 비밀번호 재설정 |
그림 18: (영어로만 제공) 비밀번호 재설정 |
일반적으로 수동 인증의 결과로 디바이스 비밀번호를 다시 설정해야 할 때 표시되는 대화 상자입니다. 이 경우 Cancel을 누르면 디바이스가 정책 기반 상태로 유지됩니다. | endState 메시지 |
B-4 | 그림 19: (영어로만 제공) 비밀번호 재설정 |
입력한 비밀번호가 비밀번호 제한을 충족하지 않을 경우 비밀번호 재설정 대화 상자를 다시 표시합니다. | endState 메시지 | ||
B-5 | 그림 20: (영어로만 제공) 비밀번호 재설정 |
새 비밀번호를 이전 비밀번호와 동일하게 설정한 후 비밀번호 재설정 대화 상자를 다시 표시합니다. | 메시지 | ||
C-1 | 그림 21: (영어로만 제공) 외부 미디어 비밀번호 입력 |
그림 22: (영어로만 제공) 외부 미디어 비밀번호 입력 |
그림 23: (영어로만 제공) 외부 미디어 비밀번호 입력 |
자동 인증이 불가능한 경우 비밀번호 인증을 위해 사용자에게 디바이스 비밀번호를 요청합니다. | endState 메시지 iForgot fusWarning |
C-2 | 그림 24: (영어로만 제공) 외부 미디어 비밀번호 입력 |
그림 25: (영어로만 제공) 외부 미디어 비밀번호 입력 |
그림 26: (영어로만 제공) 외부 미디어 비밀번호 입력 |
인증을 위해 제공된 비밀번호가 올바르지 않은 경우 사용자에게 비밀번호를 다시 입력하도록 요청합니다. | endState 메시지 iForgot fusWarning |
D-1 | 그림 27: (영어로만 제공) 외부 미디어 디바이스 보호됨 |
스윕이 발생하고 트레이 아이콘이 표시될 때 나타나는 media Shielded 대화 상자입니다. | 예 | ||
D-2 | 그림 28: (영어로만 제공) 외부 미디어 디바이스 보호됨 |
스윕이 꺼져 있을 때 표시되는 media Shielded 대화 상자입니다. | 예 | ||
E-1 | 그림 29: (영어로만 제공) 비밀번호 변경 요청됨 그림 30: (영어로만 제공) 비밀번호 변경 요청됨 |
디바이스가 인증된 후 사용자가 기존 디바이스 비밀번호를 변경하도록 요청할 때 표시됩니다. | 예 | ||
E2 | 그림 31: (영어로만 제공) 비밀번호 변경 오류 그림 32: (영어로만 제공) 비밀번호 변경 오류 |
현재 비밀번호가 올바르지 않아 비밀번호를 변경하지 못한 경우 비밀번호 변경 대화 상자를 다시 표시합니다. | 예 | ||
E-3 | 그림 33: (영어로만 제공) 비밀번호 변경 오류 그림 34: (영어로만 제공) 비밀번호 변경 오류 |
새 비밀번호가 관리자 비밀번호 제한을 충족하지 않을 경우 비밀번호 변경 대화 상자를 다시 표시합니다. | 예 | ||
E-4 | 그림 35: (영어로만 제공) 비밀번호 변경 필요 그림 36: (영어로만 제공) 비밀번호 변경 필요 |
현재 비밀번호가 더 이상 새 정책 요구 사항을 충족하지 않을 때 비밀번호 변경 대화 상자를 표시합니다. | 예 | ||
F-1 | 그림 37: (영어로만 제공) 외부 미디어 디바이스 수동 인증 그림 38: (영어로만 제공) 수동 인증 취소 확인 |
사용자가 정책에 정의된 횟수만큼 비밀번호를 입력하지 못한 경우 표시됩니다. | 예 | ||
F-2 | 그림 39: (영어로만 제공) 외부 미디어 디바이스 수동 인증 그림 40: (영어로만 제공) 수동 인증 취소 확인 |
사용자가 정책에 정의된 횟수만큼 비밀번호를 입력하지 못한 경우 표시됩니다. 이 경우 VolumeInfo.xml 파일이 없거나 손상되었습니다. | 이는 맞춤 구성 측면에서 F-1과 동일합니다. | ||
G-1 | 그림 41: (영어로만 제공) External Media Shield |
키 자료를 분실했지만 시스템/사용자 조합으로 디바이스를 복구할 수 없는 경우에 표시됩니다. 키 자료를 복원하기 위해 원래 사용자가 로그인되어 있는 보호된 컴퓨터에 디바이스를 삽입하도록 사용자에게 알려줍니다(로밍 중인 경우). 로밍 중이 아닌 경우 복구하려면 전체 시스템/사용자 일치가 필요합니다. | 예 | ||
G-2 | 그림 42: (영어로만 제공) External Media Shield |
디바이스가 CMG 5.3 이전 버전으로 보호되어 있고 원래 사용자의 원래 시스템에 없어 업그레이드할 수 없는 경우에 표시됩니다. | 예 | ||
G-3 | 그림 43: (영어로만 제공) External Media Shield |
그림 44: (영어로만 제공) External Media Shield |
그림 45: (영어로만 제공) External Media Shield |
미디어(플로피)가 너무 작아 EMS 보호를 허용할 수 없을 때 표시됩니다. | 예 |
G-4 | 그림 46: (영어로만 제공) External Media Shield |
그림 47: (영어로만 제공) External Media Shield |
그림 48: (영어로만 제공) External Media Shield |
디바이스의 여유 공간이 부족하여 EMS로 디바이스를 보호할 수 없는 경우 표시됩니다. | 예 |
G-5 | 그림 49: (영어로만 제공) External Media Shield |
디바이스의 키 자료가 분실되었고 Shield ID를 검색할 방법이 없어 복구할 방법이 없는 경우 표시됩니다. | 예 | ||
G-6 | 그림 50: (영어로만 제공) External Media Shield |
Shield가 설치되지 않은 암호화된 미디어에 대한 액세스를 정책에서 허용하지 않을 때 표시됩니다. | 예 | ||
G-7 | 그림 51: (영어로만 제공) External Media Shield |
사용자가 핸드헬드 EMS 디바이스를 Windows EMS 보호 컴퓨터에 삽입하면 표시됩니다. | 예 | ||
G-8 | 그림 52: (영어로만 제공) External Media Shield |
수동 인증 실패로 인해 키 자료가 삭제된 경우 표시됩니다. 이는 정책으로 제어됩니다. | 예 | ||
G-9 | 그림 53: (영어로만 제공) External Media Shield |
수동 인증 실패로 인해 디바이스가 휴지 기간으로 들어간 경우 표시됩니다. 이는 정책으로 제어됩니다. | 예 | ||
G-10 | 그림 54: (영어로만 제공) External Media Shield |
정책에서 요구하는 경우 읽기 전용 디바이스는 Shield로 보호할 수 없음을 사용자에게 경고합니다. | 예 | ||
G-11 | 그림 55: (영어로만 제공) External Media Shield |
디바이스가 다른 컴퓨터에서 업그레이드 스윕을 진행 중임을 사용자에게 경고합니다. | 예 | ||
G-12 | 그림 56: (영어로만 제공) External Media Shield |
설치된 EMS보다 최신인 디바이스는 복구할 수 없습니다. | 예 | ||
G-13 | 그림 57: (영어로만 제공) External Media Shield |
볼륨이 지원되지 않는 최신 IFF 형식으로 암호화됩니다. 미디어가 차단됩니다. | 예 | ||
H-1 | 그림 58: (영어로만 제공) EMS 비밀번호가 수락됨 |
디바이스 비밀번호가 수락되었음을 나타내는 말풍선 또는 대화 상자를 표시합니다. | 예 | ||
H-2 | 그림 59: (영어로만 제공) f:\ 드라이브가 자동으로 인증됨 |
디바이스가 원래 보호 컴퓨터에서 자동으로 인증되었음을 나타내는 말풍선을 표시합니다. | 예 | ||
I-1 | 그림 60: (영어로만 제공) 볼륨 스윕 진행 중 |
스윕 중 표시되는 애니메이션 대화 상자입니다. 이 단계를 수행하기 전에 디바이스를 제거하면 디바이스에 암호화되지 않은 데이터가 남기 때문에 EMS에서 이를 표시하는 것이 중요합니다. | 예 | ||
I-2 | 그림 61: (영어로만 제공) 볼륨 스윕 진행 중 |
암호 해독 스윕 중 표시되는 애니메이션 대화 상자입니다. 이 단계를 수행하기 전에 디바이스를 제거하면 디바이스에 암호화되지 않은 데이터가 남기 때문에 EMS에서 이를 표시하는 것이 중요합니다. | 예 | ||
J-1 | 그림 62: (영어로만 제공) 외부 디바이스 보호 |
EMS 파일을 새로 보호된 디바이스에 설치하는 동안 사용되는 진행률 대화 상자입니다. 미디어를 꺼내서는 안 됩니다. | 예 | ||
J-2 | 그림 63: (영어로만 제공) 보호된 외부 디바이스 업그레이드 |
보호된 디바이스에서 EMS 파일을 업그레이드하는 동안 사용되는 진행률 대화 상자입니다. 미디어를 꺼내서는 안 됩니다. | 예 | ||
K-1 | 그림 64: (영어로만 제공) 다중 사용자 경고 |
디바이스가 자동 인증될 때 빠른 사용자 전환 관련 경고에 사용되는 Yes/No 대화 상자입니다. | 예 |
8.x.x 1.0 Ask to Shield unprotected media.[EndState: ALL] url="https: www.dell.com">Link to more info about encryption or the end state... Ask to upgrade pre-EMS device (CMG Shielded) to EMS Shielding.[EndState: BLOCKED] url="https: www.dell.com">Link to more info about preEMS devices or being blocked... Ask to upgrade pre-EMS device (CMG Shielded) to EMS Shielding.[EndState: READ-ONLY] Ask to upgrade pre-EMS device (CMG Shielded) to EMS Shielding.[EndState: FULL ACCESS] Ask to restore key material.[EndState: BLOCKED] url="https: www.dell.com">Link to more info about recovery or being blocked... Ask to restore key material.[EndState: READ-ONLY] Ask to restore key material.[EndState: FULL ACCESS] This dialog is shown when a device is Shielded or recovered.[EndState: BLOCKED] This dialog is shown when a device is Shielded or recovered.[EndState: READ-ONLY] This dialog is shown when a device is Shielded or recovered.[EndState: FULL ACCESS] Shown after the user enters a password which does not meet the restrictions placed by the Administrator.[EndState: BLOCKED] Shown after the user enters a password which does not meet the restrictions placed by the Administrator.[EndState: READ-ONLY] Shown after the user enters a password which does not meet the restrictions placed by the Administrator.[EndState: FULL ACCESS] Dialog displayed when the device's password needs to be set again, usually as a result of a manual authentication. In this case a 'Cancel' will leave the device in a policy driven state..[EndState: BLOCKED] Dialog displayed when the device's password needs to be set again, usually as a result of a manual authentication. In this case a 'Cancel' will leave the device in a policy driven state..[EndState: READ-ONLY] Dialog displayed when the device's password needs to be set again, usually as a result of a manual authentication. In this case a 'Cancel' will leave the device in a policy driven state..[EndState: FULL ACCESS] Redisplay the password reset dialog when the password provided did not meet the password restrictions. Redisplay the password reset dialog after setting the new password to be the same as the previous password. Request the device password from user for password authentication when auto authentication is not possible.[EndState: BLOCKED] This is the confirmation that you really want to say 'I Forgot'. If you do you, will need to manually authenticate by contacting an administrator or logging in the owning user. This is the warning about multiple users being logged in which will result in all users having access to the device if it is authenticated! Request the device password from user for password authentication when auto authentication is not possible.[EndState: READ-ONLY] This is the confirmation that you really want to say 'I Forgot'. If you do you, will need to manually authenticate by contacting an administrator or logging in the owning user. This is the warning about multiple users being logged in which will result in all users having access to the device if it is authenticated! Request the device password from user for password authentication when auto authentication is not possible.[EndState: FULL ACCESS] This is the confirmation that you really want to say 'I Forgot'. If you do you, will need to manually authenticate by contacting an administrator or logging in the owning user. This is the warning about multiple users being logged in which will result in all users having access to the device if it is authenticated! If the password provided for authentication was incorrect, we ask the user to retry entering the password.[EndState: BLOCKED] This is the confirmation that you really want to say 'I Forgot'. If you do you, will need to manually authenticate by contacting an administrator or logging in the owning user. This is the warning about multiple users being logged in which will result in all users having access to the device if it is authenticated! If the password provided for authentication was incorrect, we ask the user to retry entering the password.[EndState: READ-ONLY] This is the confirmation that you really want to say 'I Forgot'. If you do you, will need to manually authenticate by contacting an administrator or logging in the owning user. This is the warning about multiple users being logged in which will result in all users having access to the device if it is authenticated! If the password provided for authentication was incorrect, we ask the user to retry entering the password.[EndState: FULL ACCESS] This is the confirmation that you really want to say 'I Forgot'. If you do you, will need to manually authenticate by contacting an administrator or logging in the owning user. This is the warning about multiple users being logged in which will result in all users having access to the device if it is authenticated! The 'media Shielded' dialog displayed after provisioning of a device when sweeping will occur. The 'media Shielded' dialog displayed after provisioning of a device, but *no* sweep will occur. Displayed when the user asks to change the existing device password after a device has been authenticated. Redisplay password change dialog when the change of password fails, probably due to an incorrect current password. Redisplay password change dialog when the new password does not meet administrative password restrictions. Display password change dialog when the current password no longer meets new policy requirements. Shown when the user has failed to enter the password the number of times defined by policy. This text should express the repercusions of cancelling manual authentication! Shown when the key material is lost but the machine/user combination does not allow us to recover the device. Should tell the user to insert the device in a CMG Shielded machine where the original user is logged in (if Roaming) to restore the key material. If not Roaming, we need a full machine/user match to recover. Displayed when an external device was Shielded by CMG (pre-5.3) and cannot be upgraded because its not in the original machine under the original user. Displayed when the media (floppies) is too small to allow EMS Shielding. Displayed when the external device does not have enough free space to EMS Shield the device.[EndState: BLOCKED] Displayed when the external device does not have enough free space to EMS Shield the device.[EndState: READ-ONLY] Displayed when the external device does not have enough free space to EMS Shield the device.[EndState: FULL ACCESS] Shown when a device's key material has been lost and there is no way to recover from it because there is no way to retrieve the Shield ID. Displayed when policy does not allow access of encrypted media w/o the CMG Shield installed. Displayed if the user happens to insert a Handheld EMS device into an Windows EMS Shielded machine. Displayed when the key material is deleted due to a manual authorization failure. This is controlled by policy. Displayed when device has entered a cooldown period due to a manual authorization failure. This is controlled by policy. Warns the user that a read-only device cannot be Shielded when policy requires it. Warns the user that the device was undergoing an upgrade sweep in a different machine. Cannot repair a device newer than the EMS currently installed. Volume is encrypted with an newer, unsupported IFF format. Media is blocked. Shown when a user double-clicks a file in EMSExplorer. It tells them that this feature has been disabled. If during a sweep we fail to encrypt a file due to lack of free space on the device, this dialog is shown. Progress dialog used during the process of installing EMS files into a newly Shielded device. Media *should not* be ejected at this point. Progress dialog used during the process of upgrading EMS files in a shielded device. Media *should not* be ejected at this point. The Yes/No Dialog being used for the Fast User Switching related warning when a device is being autoauthenticated...
지원 부서에 문의하려면 Dell Data Security 국제 지원 전화번호를 참조하십시오.
온라인으로 기술 지원 요청을 생성하려면 TechDirect로 이동하십시오.
추가 정보 및 리소스를 보려면 Dell 보안 커뮤니티 포럼에 참여하십시오.
Dell Encryption
03 Aug 2023
7
Solution