Dell Unity: Unable to Create Link Aggregation with Error Code: 0x6000dfc

Summary: Attempts to configure LACP results in error: Failed: The system was unable to change the link aggregation settings. This may have occurred because of memory fragmentation. Consider rebooting the relevant SP. (Error Code:0x6000dfc) ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Attempts to configure LACP results in error: 
Failed: The system was unable to change the link aggregation settings. This may have occurred because of memory fragmentation. Consider rebooting the relevant SP. (Error Code:0x6000dfc)

Cause

One reason for this error is leftover namespaces that must be removed.

Resolution

Open a service request on Dell Support and reference this knowledge base article.

Affected Products

Dell EMC Unity
Article Properties
Article Number: 000224503
Article Type: Solution
Last Modified: 15 May 2024
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.