Ir al contenido principal
Cerrar sesión

Le damos la bienvenida a Dell

Mi cuenta
  • Realice pedidos rápida y fácilmente.
  • Vea los pedidos y haga el seguimiento del estado del envío.
  • Cree una lista de sus productos y acceda a ella
  • Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Iniciar sesión Crear una cuenta Inicio de sesión en Premier Iniciar sesión en el programa para socios
Contáctenos

Sus carritos de Dell.com

Es posible que hayan cambiado los números de algunos artículos. Si no es lo que estaba buscando, pruebe a buscar todos los artículos. Buscar artículos

Número de artículo: 000190116

How to Enable Secure Boot on Your Dell Device

Resumen: Information about enabling Secure Boot for Windows 11.

Es posible que este artículo se haya traducido automáticamente. Si nos quiere hacer llegar algún comentario sobre la calidad de la traducción, utilice el formulario ubicado en la parte inferior de la página.

Contenido del artículo

Instrucciones

What is Secure Boot?

Secure Boot protects the boot process against security attacks from malicious code like malware and ransomware. Secure Boot is firmware-dependent and requires that the computer BIOS is set to UEFI mode.

How to Verify that Secure Boot is Enabled.

  1. Click the Windows Button to the bottom left of the screen or press the Windows Key.
     
  2. In the Search Bar, type: msinfo32
     
  3. Press Enter.
     
  4. System Information opens, and System Summary should be selected by default.
     
  5. On the right side of this screen, look for BIOS Mode and Secure Boot State.
     
  6. If Secure Boot is enabled, the BIOS Mode shows "UEFI," and Secure Boot state shows "On" (Figure 1).
    Windows System Information
    Figure 1

If the BIOS Mode shows "Legacy" in the Boot setting in the computer BIOS, it must be switched from Legacy to UEFI mode.

Verify that your computer was tested for the upgrade to Windows 11 before you continue as older computers may not meet the Windows 11 system requirements.
Dell computers tested for upgrade to Windows 11

 
Note: Switching the Boot Mode from Legacy to UEFI makes the current Windows installation unbootable and requires the reinstallation of Windows. Ensure to backup your personal data before you proceed with this action.
 
Note: Dell BIOS Screens may vary by computer model. Below is a general example of how to switch to UEFI mode and Enabling Secure Boot.

Switching from Legacy to UEFI Mode

  1. Boot your computer.
     
  2. Tap the F2 key when the Dell logo appears to enter the BIOS.
     
  3. The following steps can vary based on your computer model:

Alienware, Inspiron, and Vostro

  • Go to Boot > Change Secure Boot List Option to UEFI.
  • Press the F10 key to Save and Exit.

OptiPlex, Precision, Wyse, and XPS

  • Go to General > Boot Sequence > Boot List Option - Change to UEFI.
  • Click Apply > click Exit - Save the Changes.

Enabling Secure Boot
Secure Boot is controlled by the computer firmware (BIOS) and can be enabled with a few simple steps:

  1. Boot your computer.
     
  2. Tap the F2 key when the Dell logo appears to enter the BIOS.
     
  3. The following steps can vary based on your computer model:

Alienware, Inspiron, and Vostro

  • Go to Secure Boot > Change Secure Boot to Enabled.
  • Press the F10 key to Save and Exit.

OptiPlex, Precision, Wyse, and XPS

  • Go to Secure Boot > Secure Boot Enable > Check Secure Boot Enable.
  • Click Apply > click Exit > Save the changes.

The computer restarts and boots back to the Windows desktop.

More Resources:

Windows 11 - Scope of Support and System Requirements

Back to Top

Información adicional

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Propiedades del artículo

Producto afectado

Alienware, Inspiron, OptiPlex, Vostro, XPS, G Series, G Series, Alienware, Inspiron, Latitude, Vostro, XPS

Fecha de la última publicación

05 ene 2024

Versión

6

Tipo de artículo

How To

Volver al principio