How to Save and Restore Library configuration and Restore Factory Defaults on a TL2000 or TL4000
Riepilogo: Here you can find the description how to Save and/or Restore the Library configuration and the Restore Factory Defaults on a TL2000 or TL4000.
Questo articolo si applica a
Questo articolo non si applica a
Questo articolo non è legato a un prodotto specifico.
Non tutte le versioni del prodotto sono identificate in questo articolo.
Istruzioni
To
Save the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Save at the Save Configuration to File.
The Download is provided using the Browser.
The *.dbb File is located in your Downloads folder from your management system.
To
Restore the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Browse… at the Restore Configuration from File.
Select the configuration file (*.dbb) from your management system.
Click Restore at the Restore Configuration from File.
Be aware: If you load a configuration from another Library, the ServiceTag is overwritten too, and it should be corrected afterwards. A description how to do that you can find here: How to change the ServiceTag of a PowerVault TL2000 or TL4000.
To
Restore Factory Defaults
Go to Save/Restore under the Configure Library section.
Click Restore at the Restore Factory Defaults.
Confirm the prompt on the screen with OK.
Save the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Save at the Save Configuration to File.
The Download is provided using the Browser.
The *.dbb File is located in your Downloads folder from your management system.
To
Restore the Library Configuration.
Go to Save/Restore under the Configure Library section.
Click Browse… at the Restore Configuration from File.
Select the configuration file (*.dbb) from your management system.
Click Restore at the Restore Configuration from File.
Be aware: If you load a configuration from another Library, the ServiceTag is overwritten too, and it should be corrected afterwards. A description how to do that you can find here: How to change the ServiceTag of a PowerVault TL2000 or TL4000.
To
Restore Factory Defaults
Go to Save/Restore under the Configure Library section.
Click Restore at the Restore Factory Defaults.
Confirm the prompt on the screen with OK.
Prodotti interessati
PowerVault TL2000, PowerVault TL4000Proprietà dell'articolo
Numero articolo: 000205962
Tipo di articolo: How To
Ultima modifica: 27 mar 2023
Versione: 3
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.