DELL EMC Unity: The object was not found with "Pool0". (Error Code:0x1000401) error while creating Traditional Pool

概要: DELL EMC Unity :The object was not found with "Pool0". (Error Code:0x1000401) error while creating Traditional Pool on OE 5.2.0 The object was not found with "Pool0". (Error Code:0x1000401) while creating Traditional Pool. ...

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

Errors reported while creating traditional pool using two different drive types from Dell EMC Unity GUI running OE code 5.2 are shown below:
"The wrong number of drives was supplied for the specified RAID configuration, or the number of drives did not match the default RAID configuration for the drives in the drive group. Error: Code (0x6700171)"


While trying to create the pool with different disk types the following error is expected:

uemcli -d <IP Address> -u Local/admin -p <Password> /stor/config/pool create -name <Pool Name> -diskGroup dg_26 -drivesNumber 45 -storProfile tprofile_2 -type traditional

uemcli -d <IP address> -u admin -securepassword /stor/config/profile -traditional -configurable show -storProfile tprofile_1, tprofile_19 -type traditional

Please input your selection (The default selection is [1]): Operation failed. Error code: 0x1000401
The object was not found with "Pool0". (Error Code:0x1000401)

 

原因

The traditional pool creation from GUI is not achievable from Dell EMC Unity OE code 5.2.0, the same can be configured only via CLI method using uemcli.
 

解決方法

As a first step, traditional pool with only flash drive or highest available tier (drive type) should be configured, once the pool has been successfully created it can be expanded further from Unisphere with either SAS or NL SAS disk.

Steps to configure traditional pool via CLI:

  1. uemcli /stor/config/dg show      >>Shows the Disk Groups available in the system 
  2. uemcli /stor/config/profile -traditional -configurable show >> Shows the profiles available in the system
  3. uemcli -d <IP Address> -u Local/admin -p <Password> /stor/config/pool create -name <Pool Name> -diskGroup <disk_group> -drivesNumber < drive_number > -storProfile tprofile_x -type traditional 


 

対象製品

Dell EMC Unity, Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F

製品

Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F , Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition ...
文書のプロパティ
文書番号: 000204906
文書の種類: Solution
最終更新: 10 9月 2025
バージョン:  7
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。