Dell Automation: NativeEdge Virtual Machine memory oversubscription
概要: This article describes a deployment scenario that has been observed to cause memory oversubscription on a NativeEdge Virtual Machine (VM). Memory oversubscription may result in loss of access to the affected VMs. ...
この記事は次に適用されます：
この記事は次には適用されません：
この記事は、特定の製品に関連付けられていません。
すべての製品パージョンがこの記事に記載されているわけではありません。
現象
During a multi-VM deployment on a single endpoint of NativeEdge an oversubscription of resources may occur.
In the example below, a PowerEdge R760 with 128 GB of memory was used to deploy three VMs whose combined memory allocation totalled 144 GB.
Within the Automation Platform UI, all three VMs are reported as Running.
Automation Platform Alerts will contain warnings for VM memory resources being exceeded.
Attempting to open a VM console to one of the affected VMs results in the message:
‘failed to connect to server’
原因
When deploying NativeEdge VMs in Dell Automation Platform, the system validates the resources consumed by an endpoint, including, but not limited to, memory usage. This validation is intentionally designed to allow multiple VMs to be deployed, provided that resource constraints are respected at the moment each VM is powered on.
解決方法
To recover from this condition, uninstall any VMs or deployments that cause the ECE endpoint to exceed its available resource capacity. A future version of Automation Platform will include enhanced verification to prevent these rare VM oversubscription scenarios from occurring.
Please refer to Dell NativeEdge: Guidelines for System Memory and CPU Reservations on a NativeEdge Endpoint for endpoint overhead considerations.
対象製品
Dell Automation Platform, NativeEdge Solutions, Dell Automation Platform Components, NativeEdge文書のプロパティ
文書番号: 000435738
文書の種類: Solution
最終更新: 16 3月 2026
バージョン: 1
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。