Connectrix MDS upgrade returns message "Pre-upgrade check failed "Return code -1."
Podsumowanie: When performing Connectrix MDS upgrade, the "install all" command returns the message "Pre-upgrade check failed. "Return code -1."
Ten artykuł dotyczy
Ten artykuł nie dotyczy
Ten artykuł nie jest powiązany z żadnym konkretnym produktem.
Nie wszystkie wersje produktu zostały zidentyfikowane w tym artykule.
Objawy
On attempt to run "install all" command, the switch returns the message "Pre-upgrade check failed. "Return code -1."
No indications of what is wrong, md5sum of the firmware files are good. Enough space on the bootflash: and also on the standby supervisor but still the "install all" command fails with "Return code -1."
No indications of what is wrong, md5sum of the firmware files are good. Enough space on the bootflash: and also on the standby supervisor but still the "install all" command fails with "Return code -1."
Przyczyna
The command
runs fine.
The command
(This is the same message as the "install all" command.)
"show incompatibility-all system bootflash:m9700-sf2ek9-xxxx.bin"
runs fine.
The command
"show install all impact kickstart bootflash:m9700-sf2ek9-kickstart-mz.xxxx.bin system bootflash:m9700-sf2ek9-mz.xxxx.bin" fails with "Return code -1."
(This is the same message as the "install all" command.)
Rozwiązanie
Workaround:
- Perform a "system switchover" command to failover to the second supervisor. Wait until the command completes. Use the command "show system redundancy status" to confirm the action completes.
- Perform a second "system switchover" command to go back to the previously active supervisor where the upgrade code currently resides.
- Rerun the "install all" command and upgrade should complete.
Produkty, których dotyczy problem
Connectrix MDS-9710-V2, Connectrix MDS-Series Firmware 8.XProdukty
Connectrix MDS-9506, Connectrix MDS-9509, Connectrix MDS-9513, Connectrix MDS-9706, Connectrix MDS-9706-V2, Connectrix MDS-9710, Connectrix MDS-9718, Connectrix MDS-9718-V3Właściwości artykułu
Numer artykułu: 000197811
Typ artykułu: Solution
Ostatnia modyfikacja: 10 wrz 2025
Wersja: 6
Znajdź odpowiedzi na swoje pytania u innych użytkowników produktów Dell
Usługi pomocy technicznej
Sprawdź, czy Twoje urządzenie jest objęte usługą pomocy technicznej.