No Boot Image Loading Progress Bar When Booting from PXE to Deploy Operating System Using Windows Deployment Service
Resumo: This article explains how to get the loading progress bar to show when PXE booting to deploy an Operating System with Windows Deployment Service.
Este artigo aplica-se a
Este artigo não se aplica a
Este artigo não está vinculado a nenhum produto específico.
Nem todas as versões do produto estão identificadas neste artigo.
Sintomas
No Loading Progress Bar Shown
When you PXE boot to the Windows Deployment Service to deploy an OS to install, you may not see a loading progress bar. This is because the wdsmgfw.efi on some PXE servers switch to the wgl4 font without using the adjusted resolution acquired from bootmgr.efi.
This leads to the display being mismatched while files load from the wdsmgfw.efi. So, while the booting image is loading, the loading progress bar does not get displayed as expected (Figure 1 and 2).
Figure 1
Figure 2
Affected systems:
- Inspiron 5402
- Inspiron 5409
- Inspiron 7500
- Inspiron 7501
- Inspiron 5502
- Inspiron 5509
- Latitude 3410
- Latitude 3510
- Vostro 5402
- Vostro 5502
- Vostro 7500
Causa
No cause information
Resolução
To fix this behavior, you must remove the font file "wgl4_boot.ttf" under the "Boot\Fonts" folder which contains the booting image for WDS.
If you have further questions about this article, contact Dell Technical Support.
Produtos afetados
Inspiron 7500, Inspiron 7501, Latitude 3410, Latitude 3510, Vostro 7500Propriedades do artigo
Número do artigo: 000132044
Tipo de artigo: Solution
Último modificado: 22 abr. 2025
Versão: 5
Encontre as respostas de outros usuários da Dell para suas perguntas.
Serviços de suporte
Verifique se o dispositivo está coberto pelos serviços de suporte.